I´ve recently purchaced a typhoon model nr. 50500. The analog tv part
of it works fine but the DVB is having problems. On bttv-gallery.de (a
listing of card types) i have found no cards which have both the same
"gpio" AND "eeprom 40:" lines. Also, i´ve been using dvb-utils scan tool
to test if the device is working. Is there a better/simpler tool?
any help would be greatly appreciated,
-m
dmesg:
[ 8099.844000] pccard: CardBus card inserted into slot 1
[ 8100.624000] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 8100.628000] PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
[ 8100.628000] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [C187] -> GSI
11 (level, low) -> IRQ 11
[ 8100.628000] saa7133[0]: quirk: PCIPCI_NATOMA
[ 8100.628000] saa7133[0]: found at 0000:06:00.0, rev: 240, irq: 11,
latency: 0, mmio: 0x2c000000
[ 8100.628000] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 8100.628000] saa7133[0]: subsystem: 4e42:0502, board:
LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus [card=60,autodetected]
[ 8100.632000] saa7133[0]: board init: gpio is e010000
[ 8100.768000] saa7133[0]: i2c eeprom 00: 42 4e 02 05 54 20 1c 00 43 43
a9 1c 55 d2 b2 92
[ 8100.768000] saa7133[0]: i2c eeprom 10: 00 ff 22 0f ff 20 ff ff ff ff
ff ff ff ff ff ff
[ 8100.768000] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff
01 81 ff ff ff ff
[ 8100.768000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 8100.768000] saa7133[0]: i2c eeprom 40: ff 25 00 c0 ff 10 07 01 c2 96
00 16 22 15 ff ff
[ 8100.768000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 8100.768000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 8100.768000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 8100.884000] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[ 8100.932000] tuner 1-004b: setting tuner address to 61
[ 8100.972000] tuner 1-004b: type set to tda8290+75a
[ 8101.084000] tuner 1-004b: setting tuner address to 61
[ 8101.124000] tuner 1-004b: type set to tda8290+75a
[ 8101.192000] saa7133[0]: registered device video0 [v4l2]
[ 8101.192000] saa7133[0]: registered device vbi0
[ 8101.192000] saa7133[0]: registered device radio0
[ 8101.304000] saa7134 ALSA driver for DMA sound loaded
[ 8101.304000] saa7133[0]/alsa: saa7133[0] at 0x2c000000 irq 11
registered as card -2
lspci -v:
06:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135
Video Broadcast Decoder (rev f0)
Subsystem: Unknown device 4e42:0502
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 2c000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Berlin:
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Berlin
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 522000000 0 2 9 1 1 2 0
initial transponder 570000000 0 2 9 1 1 2 0
initial transponder 618000000 0 1 9 1 1 2 0
initial transponder 658000000 0 2 9 1 1 2 0
initial transponder 778000000 0 2 9 1 1 2 0
>>> tune to:
778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
__tune_to_transponder:1491: ERROR: FE_READ_STATUS failed: 5 Input/output
error
...
>>> tune to:
778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
__tune_to_transponder:1491: ERROR: FE_READ_STATUS failed: 5 Input/output
error
ERROR: initial tuning failed
dumping lists (0 services)
Done.
uname -a: (newly installed ubuntu feisty)
Linux compaq 2.6.20-16-generic #2 SMP Fri Aug 31 00:55:27 UTC 2007 i686
GNU/Linux
____________________________________________________________________________________
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news,
photos & more.
http://mobile.yahoo.com/go?refer=1GNXIC
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
