Hello list!! I've written already to post my problems with my af9005 remote control. I've tested the af9005-lirc module written by Luca and I can't make it work.
For this, I'm trying to get any input from the ir receiver inside input (its work in hasefroch)... $-:dmesg dvb-usb: found a 'Afatech DVB-T USB1.1 stick' in cold state, will try to load a firmware [ 1100.964000] dvb-usb: downloading firmware from file 'af9005.fw' [ 1101.484000] dvb-usb: found a 'Afatech DVB-T USB1.1 stick' in warm state. [ 1101.484000] dvb-usb: will use the device's hardware PID filter (table count: 32). [ 1101.488000] DVB: registering new adapter (Afatech DVB-T USB1.1 stick) [ 1101.492000] DVB: registering frontend 0 (AF9005 USB DVB-T)... [ 1101.492000] input: IR-receiver inside an USB DVB receiver as /class/input/input9 [ 1101.492000] dvb-usb: schedule remote query interval to 200 msecs. [ 1101.492000] dvb-usb: Afatech DVB-T USB1.1 stick successfully initialized and connected. As seen, the input device is recognized as /dev/input/input9 i've tried get any string of data using it: sudo cat /dev/input/event9 - nothing appears as string of data and with input-events from inputlirc package: $ sudo input-events 9 /dev/input/event9 bustype : BUS_USB vendor : 0x15a4 product : 0x9020 version : 256 name : "IR-receiver inside an USB DVB re" phys : "usb-0000:00:0c.0-1/ir0" bits ev : EV_SYN EV_KEY waiting for events timeout, quitting And nothing gotten Any ideas?? This method was not proved with af9005-lirc module from luca, would it work?? thanks in advance!!!
_______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
