Dear Darron,
I hope you are fine, someone on linux-dvb ("gimli") wrote a patch
against http://jusst.de/hg/multiproto which add HVR-4000 support to it.
With this patch I am able to follow
http://www.vdr-wiki.de/wiki/index.php/OpenSuSE_DVB-S2_-_Step_by_Step_Installationsanleitung_%28Achtung_Beta%29
and have the HVR-4000 card working with my DVB-S2's VDR :-)
Unfortunately, as with the repo from Steven Stoth and with some of your
patches against it, diseqc don't work.
Could you give a look at it ?
Thank you very much :-)
I hope it's fine to put the patch here again in case you missed it.
--
Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org
http://picasaweb.google.com/Gregoire.Favre
diff -uNr multiproto/linux/drivers/media/dvb/frontends/cx24116.c
multiproto-test-hvr400/linux/drivers/media/dvb/frontends/cx24116.c
--- multiproto/linux/drivers/media/dvb/frontends/cx24116.c 1970-01-01
01:00:00.000000000 +0100
+++ multiproto-test-hvr400/linux/drivers/media/dvb/frontends/cx24116.c
2007-11-05 22:55:49.000000000 +0100
@@ -0,0 +1,1213 @@
+/*
+ Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver
+
+ Copyright (C) 2006 Steven Toth <[EMAIL PROTECTED]>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+ * Updates by Darron Broad 2007.
+ *
+ * March
+ * Fixed some bugs.
+ * Added diseqc support.
+ * Added corrected signal strength support.
+ *
+ * August
+ * Sync with legacy version.
+ * Some clean ups.
+ */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/firmware.h>
+
+#include "dvb_frontend.h"
+#include "cx24116.h"
+
+/*
+ * Fetch firmware in the following manner.
+ *
+ * #!/bin/sh
+ * wget ftp://167.206.143.11/outgoing/Oxford/88x_2_117_24275_1_INF.zip
+ * unzip 88x_2_117_24275_1_INF.zip
+ * dd if=Driver88/hcw88bda.sys of=dvb-fe-cx24116.fw skip=81768 bs=1 count=32522
+ */
+#define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw"
+#define CX24116_SEARCH_RANGE_KHZ 5000
+
+/* registers (TO BE COMPLETED) */
+#define CX24116_REG_SIGNAL (0xd5)
+
+/* arg buffer size */
+#define CX24116_ARGLEN (0x1e)
+
+/* arg offset for DiSEqC */
+#define CX24116_DISEQC_BURST (1)
+#define CX24116_DISEQC_ARG2_2 (2) /* unknown value=2 */
+#define CX24116_DISEQC_ARG3_0 (3) /* unknown value=0 */
+#define CX24116_DISEQC_ARG4_0 (4) /* unknown value=0 */
+#define CX24116_DISEQC_MSGLEN (5)
+#define CX24116_DISEQC_MSGOFS (6)
+
+/* DiSEqC burst */
+#define CX24116_DISEQC_MINI_A (0)
+#define CX24116_DISEQC_MINI_B (1)
+
+static int debug = 0;
+#define dprintk(args...) \
+ do { \
+ if (debug) printk ("cx24116: " args); \
+ } while (0)
+
+enum cmds
+{
+ CMD_INIT_CMD10 = 0x10,
+ CMD_TUNEREQUEST = 0x11,
+ CMD_INIT_CMD13 = 0x13,
+ CMD_INIT_CMD14 = 0x14,
+ CMD_SEND_DISEQC = 0x21,
+ CMD_SET_TONEPRE = 0x22,
+ CMD_SET_TONE = 0x23,
+};
+
+/* The Demod/Tuner can't easily provide these, we cache them */
+struct cx24116_tuning
+{
+ u32 frequency;
+ u32 symbol_rate;
+ fe_spectral_inversion_t inversion;
+ enum dvbfe_fec fec;
+
+ enum dvbfe_delsys delivery;
+
+ /* Demod values */
+ u8 fec_val;
+ u8 fec_mask;
+ u8 inversion_val;
+};
+
+/* Basic commands that are sent to the firmware */
+struct cx24116_cmd
+{
+ u8 len;
+ u8 args[CX24116_ARGLEN];
+};
+
+struct cx24116_state
+{
+ struct i2c_adapter* i2c;
+ const struct cx24116_config* config;
+
+ struct dvb_frontend frontend;
+
+ struct cx24116_tuning dcur;
+ struct cx24116_tuning dnxt;
+
+ u8 skip_fw_load;
+ u8 burst;
+};
+
+static int cx24116_writereg(struct cx24116_state* state, int reg, int data)
+{
+ u8 buf[] = { reg, data };
+ struct i2c_msg msg = { .addr = state->config->demod_address,
+ .flags = 0, .buf = buf, .len = 2 };
+ int err;
+
+ if (debug>1)
+ printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n",
+ __FUNCTION__,reg, data);
+
+ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ printk("%s: writereg error(err == %i, reg == 0x%02x,"
+ " value == 0x%02x)\n", __FUNCTION__, err, reg, data);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+/* Bulk byte writes to a single I2C address, for 32k firmware load */
+static int cx24116_writeregN(struct cx24116_state* state, int reg, u8 *data,
u16 len)
+{
+ int ret = -EREMOTEIO;
+ struct i2c_msg msg;
+ u8 *buf;
+
+ buf = kmalloc(len + 1, GFP_KERNEL);
+ if (buf == NULL) {
+ printk("Unable to kmalloc\n");
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ *(buf) = reg;
+ memcpy(buf + 1, data, len);
+
+ msg.addr = state->config->demod_address;
+ msg.flags = 0;
+ msg.buf = buf;
+ msg.len = len + 1;
+
+ if (debug>1)
+ printk("cx24116: %s: write regN 0x%02x, len = %d\n",
+ __FUNCTION__,reg, len);
+
+ if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ printk("%s: writereg error(err == %i, reg == 0x%02x\n",
+ __FUNCTION__, ret, reg);
+ ret = -EREMOTEIO;
+ }
+
+error:
+ kfree(buf);
+
+ return ret;
+}
+
+static int cx24116_readreg(struct cx24116_state* state, u8 reg)
+{
+ int ret;
+ u8 b0[] = { reg };
+ u8 b1[] = { 0 };
+ struct i2c_msg msg[] = {
+ { .addr = state->config->demod_address, .flags = 0, .buf = b0,
.len = 1 },
+ { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf
= b1, .len = 1 }
+ };
+
+ ret = i2c_transfer(state->i2c, msg, 2);
+
+ if (ret != 2) {
+ printk("%s: reg=0x%x (error=%d)\n", __FUNCTION__, reg, ret);
+ return ret;
+ }
+
+ if (debug>1)
+ printk("cx24116: read reg 0x%02x, value 0x%02x\n",reg, b1[0]);
+
+ return b1[0];
+}
+
+static int cx24116_set_inversion(struct cx24116_state* state,
fe_spectral_inversion_t inversion)
+{
+ dprintk("%s(%d)\n", __FUNCTION__, inversion);
+
+ switch (inversion) {
+ case INVERSION_OFF:
+ state->dnxt.inversion_val = 0x00;
+ break;
+ case INVERSION_ON:
+ state->dnxt.inversion_val = 0x04;
+ break;
+ case INVERSION_AUTO:
+ state->dnxt.inversion_val = 0x0C;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ state->dnxt.inversion = inversion;
+
+ return 0;
+}
+
+static int cx24116_get_inversion(struct cx24116_state* state,
fe_spectral_inversion_t *inversion)
+{
+ dprintk("%s()\n", __FUNCTION__);
+ *inversion = state->dcur.inversion;
+ return 0;
+}
+
+/* A table of modulation, fec and configuration bytes for the demod.
+ * Not all S2 mmodulation schemes are support and not all rates with
+ * a scheme are support. Especially, no auto detect when in S2 mode.
+ */
+struct cx24116_modfec {
+ enum dvbfe_delsys delsys;
+ enum dvbfe_modulation modulation;
+ enum dvbfe_fec fec;
+ u8 mask; /* In DVBS mode this is used to autodetect */
+ u8 val; /* Passed to the firmware to indicate mode selection */
+} CX24116_MODFEC_MODES[] = {
+ /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */
+ { DVBFE_DELSYS_DVBS, DVBFE_MOD_QPSK, DVBFE_FEC_NONE, 0xfe, 0x30 },
+ { DVBFE_DELSYS_DVBS, DVBFE_MOD_QPSK, DVBFE_FEC_1_2, 0x02, 0x2e },
+ { DVBFE_DELSYS_DVBS, DVBFE_MOD_QPSK, DVBFE_FEC_2_3, 0x04, 0x2f },
+ { DVBFE_DELSYS_DVBS, DVBFE_MOD_QPSK, DVBFE_FEC_3_4, 0x08, 0x30 },
+ { DVBFE_DELSYS_DVBS, DVBFE_MOD_QPSK, DVBFE_FEC_4_5, 0xfe, 0x30 },
+ { DVBFE_DELSYS_DVBS, DVBFE_MOD_QPSK, DVBFE_FEC_5_6, 0x20, 0x31 },
+ { DVBFE_DELSYS_DVBS, DVBFE_MOD_QPSK, DVBFE_FEC_6_7, 0xfe, 0x30 },
+ { DVBFE_DELSYS_DVBS, DVBFE_MOD_QPSK, DVBFE_FEC_7_8, 0x80, 0x32 },
+ { DVBFE_DELSYS_DVBS, DVBFE_MOD_QPSK, DVBFE_FEC_8_9, 0xfe, 0x30 },
+ { DVBFE_DELSYS_DVBS, DVBFE_MOD_QPSK, DVBFE_FEC_AUTO, 0xfe, 0x30 },
+ /* NBC-QPSK */
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_NONE, 0x00, 0x00 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_1_4, 0x00, 0x00 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_1_3, 0x00, 0x00 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_2_5, 0x00, 0x00 },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_1_2, 0x00, 0x04 },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_3_5, 0x00, 0x05 },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_2_3, 0x00, 0x06 },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_3_4, 0x00, 0x07 },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_4_5, 0x00, 0x08 },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_5_6, 0x00, 0x09 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_6_7, 0x00, 0x00 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_7_8, 0x00, 0x00 },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_8_9, 0x00, 0x0a },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_9_10, 0x00, 0x0b },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_QPSK, DVBFE_FEC_AUTO, 0x00, 0x00 },
+ /* 8PSK */
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_NONE, 0x00, 0x00 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_1_4, 0x00, 0x00 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_1_3, 0x00, 0x00 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_2_5, 0x00, 0x00 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_1_2, 0x00, 0x00 },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_3_5, 0x00, 0x0c },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_2_3, 0x00, 0x0d },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_3_4, 0x00, 0x0e },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_4_5, 0x00, 0x00 },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_5_6, 0x00, 0x0f },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_6_7, 0x00, 0x00 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_7_8, 0x00, 0x00 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_8_9, 0x00, 0x10 },
+ { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_9_10, 0x00, 0x11 },
+// { DVBFE_DELSYS_DVBS2, DVBFE_MOD_8PSK, DVBFE_FEC_AUTO, 0x00, 0x00 },
+};
+
+static int cx24116_lookup_fecmod(struct cx24116_state* state,
+ enum dvbfe_delsys d, enum dvbfe_modulation m, enum dvbfe_fec f)
+{
+ int i, ret = -EOPNOTSUPP;
+
+ for(i=0 ; i < sizeof(CX24116_MODFEC_MODES) / sizeof(struct
cx24116_modfec) ; i++)
+ {
+ if( (d == CX24116_MODFEC_MODES[i].delsys) &&
+ (m == CX24116_MODFEC_MODES[i].modulation) &&
+ (f == CX24116_MODFEC_MODES[i].fec) )
+ {
+ ret = i;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int cx24116_set_fec(struct cx24116_state* state, struct dvbfe_params *p)
+{
+ int ret = 0;
+ dprintk("%s()\n", __FUNCTION__);
+
+ switch(p->delivery)
+ {
+ case DVBFE_DELSYS_DVBS:
+ ret = cx24116_lookup_fecmod(state,
+ p->delivery, p->delsys.dvbs.modulation,
p->delsys.dvbs.fec);
+ state->dnxt.fec = p->delsys.dvbs.fec;
+ break;
+ case DVBFE_DELSYS_DVBS2:
+ ret = cx24116_lookup_fecmod(state,
+ p->delivery, p->delsys.dvbs2.modulation,
p->delsys.dvbs2.fec);
+ state->dnxt.fec = p->delsys.dvbs2.fec;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ if(ret < 0)
+ return ret;
+
+ state->dnxt.fec_val = CX24116_MODFEC_MODES[ret].val;
+ state->dnxt.fec_mask = CX24116_MODFEC_MODES[ret].mask;
+ dprintk("%s() fec_val/mask = 0x%02x/0x%02x\n", __FUNCTION__,
+ state->dnxt.fec_val, state->dnxt.fec_mask);
+
+ return 0;
+}
+
+static int cx24116_get_fec(struct cx24116_state* state,
+ enum dvbfe_fec *fec)
+{
+ dprintk("%s()\n", __FUNCTION__);
+ *fec = state->dcur.fec;
+ return 0;
+}
+
+static int cx24116_set_symbolrate(struct cx24116_state* state, struct
dvbfe_params *p)
+{
+ int ret = 0;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ switch(p->delivery)
+ {
+ case DVBFE_DELSYS_DVBS:
+ state->dnxt.symbol_rate = p->delsys.dvbs.symbol_rate;
+ break;
+ case DVBFE_DELSYS_DVBS2:
+ state->dnxt.symbol_rate = p->delsys.dvbs2.symbol_rate;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ dprintk("%s() symbol_rate = %d\n", __FUNCTION__,
state->dnxt.symbol_rate);
+
+ /* check if symbol rate is within limits */
+ if ((state->dnxt.symbol_rate >
state->frontend.ops.info.symbol_rate_max) ||
+ (state->dnxt.symbol_rate <
state->frontend.ops.info.symbol_rate_min))
+ ret = -EOPNOTSUPP;
+
+ return ret;
+}
+
+static int cx24116_load_firmware (struct dvb_frontend* fe, const struct
firmware *fw);
+
+static int cx24116_firmware_ondemand(struct dvb_frontend* fe)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ const struct firmware *fw;
+ int ret = 0;
+
+ dprintk("%s()\n",__FUNCTION__);
+
+ if (cx24116_readreg(state, 0x20) > 0)
+ {
+
+ if (state->skip_fw_load)
+ return 0;
+
+ /* Load firmware */
+ /* request the firmware, this will block until someone uploads
it */
+ printk("%s: Waiting for firmware upload (%s)...\n",
__FUNCTION__, CX24116_DEFAULT_FIRMWARE);
+ ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE,
&state->i2c->dev);
+ printk("%s: Waiting for firmware upload(2)...\n", __FUNCTION__);
+ if (ret) {
+ printk("%s: No firmware uploaded (timeout or file not
found?)\n", __FUNCTION__);
+ return ret;
+ }
+
+ /* Make sure we don't recurse back through here during loading
*/
+ state->skip_fw_load = 1;
+
+ ret = cx24116_load_firmware(fe, fw);
+ if (ret)
+ printk("%s: Writing firmware to device failed\n",
__FUNCTION__);
+
+ release_firmware(fw);
+
+ printk("%s: Firmware upload %s\n", __FUNCTION__, ret == 0 ?
"complete" : "failed");
+
+ /* Ensure firmware is always loaded if required */
+ state->skip_fw_load = 0;
+ }
+
+ return ret;
+}
+
+/* Take a basic firmware command structure, format it and forward it for
processing */
+static int cx24116_cmd_execute(struct dvb_frontend* fe, struct cx24116_cmd
*cmd)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ int i, ret;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ /* Load the firmware if required */
+ if ( (ret = cx24116_firmware_ondemand(fe)) != 0)
+ {
+ printk("%s(): Unable initialise the firmware\n", __FUNCTION__);
+ return ret;
+ }
+
+ /* Write the command */
+ for(i = 0; i < cmd->len ; i++)
+ {
+ dprintk("%s: 0x%02x == 0x%02x\n", __FUNCTION__, i,
cmd->args[i]);
+ cx24116_writereg(state, i, cmd->args[i]);
+ }
+
+ /* Start execution and wait for cmd to terminate */
+ cx24116_writereg(state, 0x1f, 0x01);
+ while( cx24116_readreg(state, 0x1f) )
+ {
+ msleep(10);
+ if(i++ > 64)
+ {
+ /* Avoid looping forever if the firmware does no
respond */
+ printk("%s() Firmware not responding\n", __FUNCTION__);
+ return -EREMOTEIO;
+ }
+ }
+ return 0;
+}
+
+static int cx24116_load_firmware (struct dvb_frontend* fe, const struct
firmware *fw)
+{
+ struct cx24116_state* state = fe->demodulator_priv;
+ struct cx24116_cmd cmd;
+ int ret;
+
+ dprintk("%s\n", __FUNCTION__);
+ dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n"
+ ,fw->size
+ ,fw->data[0]
+ ,fw->data[1]
+ ,fw->data[ fw->size-2 ]
+ ,fw->data[ fw->size-1 ]
+ );
+
+ /* Toggle 88x SRST pin to reset demod */
+ if (state->config->reset_device)
+ state->config->reset_device(fe);
+
+ /* Begin the firmware load process */
+ /* Prepare the demod, load the firmware, cleanup after load */
+ cx24116_writereg(state, 0xF1, 0x08);
+ cx24116_writereg(state, 0xF2, cx24116_readreg(state, 0xF2) | 0x03);
+ cx24116_writereg(state, 0xF3, 0x46);
+ cx24116_writereg(state, 0xF9, 0x00);
+
+ cx24116_writereg(state, 0xF0, 0x03);
+ cx24116_writereg(state, 0xF4, 0x81);
+ cx24116_writereg(state, 0xF5, 0x00);
+ cx24116_writereg(state, 0xF6, 0x00);
+
+ /* write the entire firmware as one transaction */
+ cx24116_writeregN(state, 0xF7, fw->data, fw->size);
+
+ cx24116_writereg(state, 0xF4, 0x10);
+ cx24116_writereg(state, 0xF0, 0x00);
+ cx24116_writereg(state, 0xF8, 0x06);
+
+ /* Firmware CMD 10: Chip config? */
+ cmd.args[0x00] = CMD_INIT_CMD10;
+ cmd.args[0x01] = 0x05;
+ cmd.args[0x02] = 0xdc;
+ cmd.args[0x03] = 0xda;
+ cmd.args[0x04] = 0xae;
+ cmd.args[0x05] = 0xaa;
+ cmd.args[0x06] = 0x04;
+ cmd.args[0x07] = 0x9d;
+ cmd.args[0x08] = 0xfc;
+ cmd.args[0x09] = 0x06;
+ cmd.len= 0x0a;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ cx24116_writereg(state, 0x9d, 0x00);
+
+ /* Firmware CMD 14: Unknown */
+ cmd.args[0x00] = CMD_INIT_CMD14;
+ cmd.args[0x01] = 0x00;
+ cmd.args[0x02] = 0x00;
+ cmd.len= 0x03;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ cx24116_writereg(state, 0xe5, 0x00);
+
+ /* Firmware CMD 13: Unknown - Firmware config? */
+ cmd.args[0x00] = CMD_INIT_CMD13;
+ cmd.args[0x01] = 0x01;
+ cmd.args[0x02] = 0x75;
+ cmd.args[0x03] = 0x00;
+ cmd.args[0x04] = 0x02;
+ cmd.args[0x05] = 0x00;
+ cmd.len= 0x06;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ return 0;
+}
+
+static int cx24116_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t
voltage)
+{
+ /* The isl6421 module will override this function in the fops. */
+ dprintk("%s() This should never appear if the isl6421 module is loaded
correctly\n",__FUNCTION__);
+
+ return -EOPNOTSUPP;
+}
+
+static int cx24116_read_status(struct dvb_frontend* fe, fe_status_t* status)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+
+ int lock = cx24116_readreg(state, 0x9d);
+
+ dprintk("%s: status = 0x%02x\n", __FUNCTION__, lock);
+
+ *status = 0;
+
+ if (lock & 0x01)
+ *status |= FE_HAS_SIGNAL;
+ if (lock & 0x02)
+ *status |= FE_HAS_CARRIER;
+ if (lock & 0x04)
+ *status |= FE_HAS_VITERBI;
+ if (lock & 0x08)
+ *status |= FE_HAS_SYNC | FE_HAS_LOCK;
+
+ return 0;
+}
+
+/* TODO: Not clear how we do this */
+static int cx24116_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+ //struct cx24116_state *state = fe->demodulator_priv;
+ dprintk("%s()\n", __FUNCTION__);
+ *ber = 0;
+
+ return 0;
+}
+
+/* Signal strength (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */
+static int cx24116_read_signal_strength(struct dvb_frontend* fe, u16*
signal_strength)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ u8 strength_reg;
+ static const u32 strength_tab[] = { /* 10 x Table (rounded up) */
+
0x00000,0x0199A,0x03333,0x04ccD,0x06667,0x08000,0x0999A,0x0b333,0x0cccD,0x0e667,
+ 0x10000,0x1199A,0x13333,0x14ccD,0x16667,0x18000 };
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ strength_reg = cx24116_readreg(state, CX24116_REG_SIGNAL);
+
+ if(strength_reg < 0xa0)
+ *signal_strength = strength_tab [ ( strength_reg & 0xf0 ) >>
4 ] +
+ ( strength_tab [ ( strength_reg & 0x0f ) ] >> 4
);
+ else
+ *signal_strength = 0xffff;
+
+ dprintk("%s: Signal strength (raw / cooked) = (0x%02x / 0x%04x)\n",
+ __FUNCTION__,strength_reg,*signal_strength);
+
+ return 0;
+}
+
+/* TODO: Not clear how we do this */
+static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+ //struct cx24116_state *state = fe->demodulator_priv;
+ dprintk("%s()\n", __FUNCTION__);
+ *snr = 0;
+
+ return 0;
+}
+
+/* TODO: Not clear how we do this */
+static int cx24116_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+ //struct cx24116_state *state = fe->demodulator_priv;
+ dprintk("%s()\n", __FUNCTION__);
+ *ucblocks = 0;
+
+ return 0;
+}
+
+/* Overwrite the current tuning params, we are about to tune */
+static void cx24116_clone_params(struct dvb_frontend* fe)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur));
+}
+
+/* Why isn't this a generic frontend core function? */
+static enum dvbfe_fec cx24116_convert_oldfec_to_new(enum fe_code_rate c)
+{
+ enum dvbfe_fec fec = DVBFE_FEC_NONE;
+
+ switch(c)
+ {
+ case FEC_NONE: fec = DVBFE_FEC_NONE; break;
+ case FEC_1_2 : fec = DVBFE_FEC_1_2 ; break;
+ case FEC_2_3 : fec = DVBFE_FEC_2_3 ; break;
+ case FEC_3_4 : fec = DVBFE_FEC_3_4 ; break;
+ case FEC_4_5 : fec = DVBFE_FEC_4_5 ; break;
+ case FEC_5_6 : fec = DVBFE_FEC_5_6 ; break;
+ case FEC_6_7 : fec = DVBFE_FEC_6_7 ; break;
+ case FEC_7_8 : fec = DVBFE_FEC_7_8 ; break;
+ case FEC_8_9 : fec = DVBFE_FEC_8_9 ; break;
+ case FEC_AUTO: fec = DVBFE_FEC_AUTO; break;
+ }
+
+ return fec;
+}
+
+/* Why isn't this a generic frontend core function? */
+static enum dvbfe_fec cx24116_convert_newfec_to_old(enum dvbfe_fec c)
+{
+ fe_code_rate_t fec;
+
+ switch(c)
+ {
+ case DVBFE_FEC_NONE: fec = FEC_NONE; break;
+ case DVBFE_FEC_1_2 : fec = FEC_1_2 ; break;
+ case DVBFE_FEC_2_3 : fec = FEC_2_3 ; break;
+ case DVBFE_FEC_3_4 : fec = FEC_3_4 ; break;
+ case DVBFE_FEC_4_5 : fec = FEC_4_5 ; break;
+ case DVBFE_FEC_5_6 : fec = FEC_5_6 ; break;
+ case DVBFE_FEC_6_7 : fec = FEC_6_7 ; break;
+ case DVBFE_FEC_7_8 : fec = FEC_7_8 ; break;
+ case DVBFE_FEC_8_9 : fec = FEC_8_9 ; break;
+ case DVBFE_FEC_AUTO: fec = FEC_AUTO; break;
+ default: fec = FEC_NONE; break;
+ }
+
+ return fec;
+}
+
+/* Why isn't this a generic frontend core function? */
+static int cx24116_create_new_qpsk_feparams(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *pFrom,
+ struct dvbfe_params *pTo)
+{
+ int ret = 0;
+
+ dprintk("%s\n", __FUNCTION__);
+
+ memset(pTo, 0, sizeof(struct dvbfe_params));
+
+ pTo->frequency = pFrom->frequency;
+ pTo->inversion = pFrom->inversion;
+ pTo->delivery = DVBFE_DELSYS_DVBS;
+ pTo->delsys.dvbs.symbol_rate = pFrom->u.qpsk.symbol_rate;
+ pTo->delsys.dvbs.modulation = DVBFE_MOD_QPSK;
+ pTo->delsys.dvbs.fec =
cx24116_convert_oldfec_to_new(pFrom->u.qpsk.fec_inner);
+
+ /* I guess we could do more validation on the old fe params and return
error */
+ return ret;
+}
+
+/* Why isn't this a generic frontend core function? */
+static int cx24116_create_old_qpsk_feparams(struct dvb_frontend* fe,
+ struct dvbfe_params *pFrom,
+ struct dvb_frontend_parameters *pTo)
+{
+ int ret = 0;
+
+ dprintk("%s\n", __FUNCTION__);
+
+ memset(pTo, 0, sizeof(struct dvb_frontend_parameters));
+
+ pTo->frequency = pFrom->frequency;
+ pTo->inversion = pFrom->inversion;
+
+ switch(pFrom->delivery)
+ {
+ case DVBFE_DELSYS_DVBS:
+ pTo->u.qpsk.fec_inner =
cx24116_convert_newfec_to_old(pFrom->delsys.dvbs.fec);
+ pTo->u.qpsk.symbol_rate =
pFrom->delsys.dvbs.symbol_rate;
+ break;
+ default:
+ ret = -1;
+ }
+
+ /* I guess we could do more validation on the old fe params and return
error */
+ return ret;
+}
+
+static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+ struct cx24116_cmd cmd;
+ int ret;
+
+ dprintk("%s(%d)\n", __FUNCTION__, tone);
+ if ( (tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF) ) {
+ printk("%s: Invalid, tone=%d\n", __FUNCTION__, tone);
+ return -EINVAL;
+ }
+
+ /* This is always done before the tone is set */
+ cmd.args[0x00] = CMD_SET_TONEPRE;
+ cmd.args[0x01] = 0x00;
+ cmd.len= 0x02;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ /* Now we set the tone */
+ cmd.args[0x00] = CMD_SET_TONE;
+ cmd.args[0x01] = 0x00;
+ cmd.args[0x02] = 0x00;
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ dprintk("%s: setting tone on\n", __FUNCTION__);
+ cmd.args[0x03] = 0x01;
+ break;
+ case SEC_TONE_OFF:
+ dprintk("%s: setting tone off\n",__FUNCTION__);
+ cmd.args[0x03] = 0x00;
+ break;
+ }
+ cmd.len= 0x04;
+
+ return cx24116_cmd_execute(fe, &cmd);
+}
+
+/* Initialise DiSEqC */
+static int cx24116_diseqc_init(struct dvb_frontend* fe)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+
+ /* Default DiSEqC burst state */
+ state->burst = CX24116_DISEQC_MINI_A;
+
+ return 0;
+}
+
+/* Send DiSEqC message with derived burst (hack) || previous burst */
+static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct
dvb_diseqc_master_cmd *d)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ struct cx24116_cmd cmd;
+ int i, ret;
+
+ /* Dump DiSEqC message */
+ if (debug) {
+ printk("cx24116: %s(", __FUNCTION__);
+ for(i = 0 ; i < d->msg_len ;) {
+ printk("0x%02x", d->msg[i]);
+ if(++i < d->msg_len)
+ printk(", ");
+ }
+ printk(")\n");
+ }
+
+ if(d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS))
+ return -EINVAL;
+
+ cmd.args[0x00] = CMD_SEND_DISEQC;
+ cmd.args[CX24116_DISEQC_ARG2_2] = 0x02;
+ cmd.args[CX24116_DISEQC_ARG3_0] = 0x00;
+ cmd.args[CX24116_DISEQC_ARG4_0] = 0x00;
+
+ /* DiSEqC message */
+ for (i = 0; i < d->msg_len; i++)
+ cmd.args[CX24116_DISEQC_MSGOFS + i] = d->msg[i];
+
+ /* Hack: Derive burst from command else use previous burst */
+ if(d->msg_len >= 4 && d->msg[2] == 0x38)
+ cmd.args[CX24116_DISEQC_BURST] = (d->msg[3] >> 2) & 1;
+ else
+ cmd.args[CX24116_DISEQC_BURST] = state->burst;
+
+ cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len;
+ cmd.len = CX24116_DISEQC_MSGOFS + d->msg_len;
+
+ ret = cx24116_cmd_execute(fe, &cmd);
+
+ /* Firmware command duration is unknown, so guess...
+ *
+ * Eutelsat spec:
+ * >15ms delay +
+ * 13.5ms per byte +
+ * >15ms delay +
+ * 12.5ms burst +
+ * >15ms delay
+ */
+ if(ret == 0)
+ msleep( (cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60 );
+
+ return ret;
+}
+
+/* Send DiSEqC burst */
+static int cx24116_diseqc_send_burst(struct dvb_frontend* fe,
fe_sec_mini_cmd_t burst)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ struct cx24116_cmd cmd;
+ int ret;
+
+ dprintk("%s(%d)\n",__FUNCTION__,(int)burst);
+
+ cmd.args[0x00] = CMD_SEND_DISEQC;
+ cmd.args[CX24116_DISEQC_ARG2_2] = 0x02;
+ cmd.args[CX24116_DISEQC_ARG3_0] = 0x00;
+ cmd.args[CX24116_DISEQC_ARG4_0] = 0x00;
+
+ if (burst == SEC_MINI_A)
+ cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A;
+ else if(burst == SEC_MINI_B)
+ cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_B;
+ else
+ return -EINVAL;
+
+ /* Cache as previous burst state */
+ state->burst= cmd.args[CX24116_DISEQC_BURST];
+
+ cmd.args[CX24116_DISEQC_MSGLEN] = 0x00;
+ cmd.len= CX24116_DISEQC_MSGOFS;
+
+ ret= cx24116_cmd_execute(fe, &cmd);
+
+ /* Firmware command duration is unknown, so guess... */
+ if(ret == 0)
+ msleep(60);
+
+ return ret;
+}
+
+static void cx24116_release(struct dvb_frontend* fe)
+{
+ struct cx24116_state* state = fe->demodulator_priv;
+ dprintk("%s\n",__FUNCTION__);
+ kfree(state);
+}
+
+static struct dvb_frontend_ops cx24116_ops;
+
+struct dvb_frontend* cx24116_attach(const struct cx24116_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct cx24116_state* state = NULL;
+ int ret;
+
+ dprintk("%s\n",__FUNCTION__);
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct cx24116_state), GFP_KERNEL);
+ if (state == NULL) {
+ printk("Unable to kmalloc\n");
+ goto error;
+ }
+
+ /* setup the state */
+ memset(state, 0, sizeof(struct cx24116_state));
+
+ state->config = config;
+ state->i2c = i2c;
+
+ /* check if the demod is present */
+ ret = (cx24116_readreg(state, 0xFF) << 8) | cx24116_readreg(state,
0xFE);
+ if (ret != 0x0501) {
+ printk("Invalid probe, probably not a CX24116 device\n");
+ goto error;
+ }
+
+ /* create dvb_frontend */
+ memcpy(&state->frontend.ops, &cx24116_ops, sizeof(struct
dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error:
+ kfree(state);
+
+ return NULL;
+}
+
+static struct dvbfe_info dvbs_info = {
+ .name = "Conexant CX24116 DVB-S",
+ .delivery = DVBFE_DELSYS_DVBS,
+ .delsys = {
+ .dvbs.modulation = DVBFE_MOD_QPSK,
+ .dvbs.fec = DVBFE_FEC_1_2 | DVBFE_FEC_2_3 |
+ DVBFE_FEC_3_4 | DVBFE_FEC_4_5 |
+ DVBFE_FEC_5_6 | DVBFE_FEC_6_7 |
+ DVBFE_FEC_7_8 | DVBFE_FEC_AUTO
+ },
+
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_step = 1011,
+ .frequency_tolerance = 5000,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000
+};
+
+static const struct dvbfe_info dvbs2_info = {
+ .name = "Conexant CX24116 DVB-S2",
+ .delivery = DVBFE_DELSYS_DVBS2,
+ .delsys = {
+ .dvbs2.modulation = DVBFE_MOD_QPSK |
DVBFE_MOD_8PSK,
+
+ /* TODO: Review these */
+ .dvbs2.fec = DVBFE_FEC_1_4 | DVBFE_FEC_1_3
|
+ DVBFE_FEC_2_5 | DVBFE_FEC_1_2
|
+ DVBFE_FEC_3_5 | DVBFE_FEC_2_3
|
+ DVBFE_FEC_3_4 | DVBFE_FEC_4_5
|
+ DVBFE_FEC_5_6 | DVBFE_FEC_8_9
|
+ DVBFE_FEC_9_10,
+
+ },
+
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_step = 0,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .symbol_rate_tolerance = 0
+};
+
+static int cx24116_set_params(struct dvb_frontend* fe, struct dvbfe_params *p)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ struct cx24116_cmd cmd;
+ fe_status_t tunerstat;
+ int ret;
+ u8 retune=4;
+
+ dprintk("%s()\n",__FUNCTION__);
+
+ state->dnxt.delivery = p->delivery;
+ state->dnxt.frequency = p->frequency;
+
+ if ((ret = cx24116_set_inversion(state, p->inversion)) != 0)
+ return ret;
+
+ if ((ret = cx24116_set_fec(state, p)) != 0)
+ return ret;
+
+ if ((ret = cx24116_set_symbolrate(state, p)) != 0)
+ return ret;
+
+ /* discard the 'current' tuning parameters and prepare to tune */
+ cx24116_clone_params(fe);
+
+ dprintk("%s: frequency = %d\n", __FUNCTION__,
state->dcur.frequency);
+ dprintk("%s: symbol_rate = %d\n", __FUNCTION__,
state->dcur.symbol_rate);
+ dprintk("%s: FEC = %d (mask/val = 0x%02x/0x%02x)\n",
__FUNCTION__,
+ state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val);
+ dprintk("%s: Inversion = %d (val = 0x%02x)\n", __FUNCTION__,
+ state->dcur.inversion, state->dcur.inversion_val);
+
+ if (state->config->set_ts_params)
+ state->config->set_ts_params(fe, 0);
+
+ /* Prepare a tune request */
+ cmd.args[0x00] = CMD_TUNEREQUEST;
+
+ /* Frequency */
+ cmd.args[0x01] = (state->dcur.frequency & 0xff0000) >> 16;
+ cmd.args[0x02] = (state->dcur.frequency & 0x00ff00) >> 8;
+ cmd.args[0x03] = (state->dcur.frequency & 0x0000ff);
+
+ /* Symbol Rate */
+ cmd.args[0x04] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8;
+ cmd.args[0x05] = ((state->dcur.symbol_rate / 1000) & 0x00ff);
+
+ /* Automatic Inversion */
+ cmd.args[0x06] = state->dcur.inversion_val;
+
+ /* Modulation / FEC */
+ cmd.args[0x07] = state->dcur.fec_val;
+
+ cmd.args[0x08] = CX24116_SEARCH_RANGE_KHZ >> 8;
+ cmd.args[0x09] = CX24116_SEARCH_RANGE_KHZ & 0xff;
+ cmd.args[0x0a] = 0x00;
+ cmd.args[0x0b] = 0x00;
+ cmd.args[0x0c] = 0x02;
+ cmd.args[0x0d] = state->dcur.fec_mask;
+ cmd.args[0x0e] = 0x06;
+ cmd.args[0x0f] = 0x00;
+ cmd.args[0x10] = 0x00;
+ cmd.args[0x11] = 0xFA;
+ cmd.args[0x12] = 0x24;
+ cmd.len= 0x13;
+
+ do {
+ /* Reset status register? */
+ cx24116_writereg(state, 0x9d, 0xc1);
+
+ /* Tune */
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if( ret != 0 )
+ break;
+
+ /* The hardware can take time to lock, wait a while */
+ msleep(500);
+
+ cx24116_read_status(fe, &tunerstat);
+ if(tunerstat & FE_HAS_SIGNAL) {
+ if(tunerstat & FE_HAS_SYNC)
+ /* Tuned */
+ break;
+ else if(p->delivery == DVBFE_DELSYS_DVBS2)
+ /* Toggle pilot bit */
+ cmd.args[0x07] ^= 0x40;
+ }
+ }
+ while(--retune);
+
+ return ret;
+}
+
+/* Why isn't this part of the frontend core? */
+/* This could be generic and set_params gets callvia via the ops */
+static int cx24116_set_frontend(struct dvb_frontend* fe, struct
dvb_frontend_parameters *p)
+{
+ struct dvbfe_params newfe;
+ int ret = 0;
+
+ dprintk("%s\n", __FUNCTION__);
+
+ ret = cx24116_create_new_qpsk_feparams(fe, p, &newfe);
+ if(ret != 0)
+ return ret;
+
+ return cx24116_set_params(fe, &newfe);
+}
+
+static int cx24116_get_params(struct dvb_frontend* fe,
+ struct dvbfe_params *p)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ int ret = 0;
+
+ dprintk("%s()\n",__FUNCTION__);
+
+ p->frequency = state->dcur.frequency;
+ if (cx24116_get_inversion(state, &p->inversion) != 0) {
+ printk("%s: Failed to get inversion status\n",__FUNCTION__);
+ return -EREMOTEIO;
+ }
+
+ p->delivery = state->dcur.delivery;
+
+ switch(p->delivery)
+ {
+ case DVBFE_DELSYS_DVBS2:
+ cx24116_get_fec(state, &p->delsys.dvbs2.fec);
+ p->delsys.dvbs2.symbol_rate = state->dcur.symbol_rate;
+ break;
+ case DVBFE_DELSYS_DVBS:
+ cx24116_get_fec(state, &p->delsys.dvbs.fec);
+ p->delsys.dvbs.symbol_rate = state->dcur.symbol_rate;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/* Why isn't this a generic frontend core function? */
+/* This could be generic and get_params gets callvia via the ops */
+static int cx24116_get_frontend(struct dvb_frontend* fe, struct
dvb_frontend_parameters *p)
+{
+ struct dvbfe_params feparams;
+ int ret;
+ dprintk("%s()\n",__FUNCTION__);
+
+ ret = cx24116_get_params(fe, &feparams);
+ if(ret != 0)
+ return ret;
+
+ return cx24116_create_old_qpsk_feparams(fe, &feparams, p);
+}
+
+static int cx24116_get_info(struct dvb_frontend *fe, struct dvbfe_info
*fe_info)
+{
+ dprintk("%s()\n",__FUNCTION__);
+
+ switch (fe_info->delivery)
+ {
+ case DVBFE_DELSYS_DVBS:
+ dprintk("%s() DVBFE_DELSYS_DVBS\n",__FUNCTION__);
+ memcpy(fe_info, &dvbs_info, sizeof (dvbs_info));
+ break;
+ case DVBFE_DELSYS_DVBS2:
+ dprintk("%s() DVBFE_DELSYS_DVBS2\n",__FUNCTION__);
+ memcpy(fe_info, &dvbs2_info, sizeof (dvbs2_info));
+ break;
+ default:
+ dprintk("%s() invalid arg\n",__FUNCTION__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* TODO: The hardware does DSS too, how does the kernel demux handle this? */
+static int cx24116_get_delsys(struct dvb_frontend *fe,
+ enum dvbfe_delsys *fe_delsys)
+{
+ dprintk("%s()\n",__FUNCTION__);
+ *fe_delsys = DVBFE_DELSYS_DVBS | DVBFE_DELSYS_DVBS2;
+
+ return 0;
+}
+
+/* TODO: is this necessary? */
+static enum dvbfe_algo cx24116_get_algo(struct dvb_frontend *fe)
+{
+ dprintk("%s()\n",__FUNCTION__);
+ return DVBFE_ALGO_SW;
+}
+
+static int cx24116_initfe(struct dvb_frontend* fe)
+{
+ dprintk("%s()\n",__FUNCTION__);
+
+ return cx24116_diseqc_init(fe);
+}
+
+static struct dvb_frontend_ops cx24116_ops = {
+
+ .info = {
+ .name = "Conexant CX24116/CX24118",
+ .type = FE_QPSK,
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_stepsize = 1011, /* kHz for QPSK frontends */
+ .frequency_tolerance = 5000,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_RECOVER
+ },
+
+ .release = cx24116_release,
+
+ .init = cx24116_initfe,
+ .set_frontend = cx24116_set_frontend,
+ .get_frontend = cx24116_get_frontend,
+ .read_status = cx24116_read_status,
+ .read_ber = cx24116_read_ber,
+ .read_signal_strength = cx24116_read_signal_strength,
+ .read_snr = cx24116_read_snr,
+ .read_ucblocks = cx24116_read_ucblocks,
+ .set_tone = cx24116_set_tone,
+ .set_voltage = cx24116_set_voltage,
+ .diseqc_send_master_cmd = cx24116_send_diseqc_msg,
+ .diseqc_send_burst = cx24116_diseqc_send_burst,
+ .set_params = cx24116_set_params,
+ .get_params = cx24116_get_params,
+ .get_info = cx24116_get_info,
+ .get_delsys = cx24116_get_delsys,
+ .get_frontend_algo = cx24116_get_algo,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118
hardware");
+MODULE_AUTHOR("Steven Toth");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(cx24116_attach);
diff -uNr multiproto/linux/drivers/media/dvb/frontends/cx24116.h
multiproto-test-hvr400/linux/drivers/media/dvb/frontends/cx24116.h
--- multiproto/linux/drivers/media/dvb/frontends/cx24116.h 1970-01-01
01:00:00.000000000 +0100
+++ multiproto-test-hvr400/linux/drivers/media/dvb/frontends/cx24116.h
2007-11-05 21:56:48.000000000 +0100
@@ -0,0 +1,50 @@
+/*
+ Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver
+
+ Copyright (C) 2006 Steven Toth <[EMAIL PROTECTED]>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef CX24116_H
+#define CX24116_H
+
+#include <linux/dvb/frontend.h>
+
+struct cx24116_config
+{
+ /* the demodulator's i2c address */
+ u8 demod_address;
+
+ /* Need to set device param for start_dma */
+ int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
+
+ /* Need to reset device during firmware loading */
+ int (*reset_device)(struct dvb_frontend* fe);
+};
+
+#if defined(CONFIG_DVB_CX24116) || defined(CONFIG_DVB_CX24116_MODULE)
+extern struct dvb_frontend* cx24116_attach(const struct cx24116_config* config,
+ struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* cx24116_attach(const struct cx24116_config*
config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_CX24116
+
+#endif /* CX24116_H */
diff -uNr multiproto/linux/drivers/media/dvb/frontends/Kconfig
multiproto-test-hvr400/linux/drivers/media/dvb/frontends/Kconfig
--- multiproto/linux/drivers/media/dvb/frontends/Kconfig 2007-11-05
10:26:03.000000000 +0100
+++ multiproto-test-hvr400/linux/drivers/media/dvb/frontends/Kconfig
2007-11-05 12:36:14.000000000 +0100
@@ -34,6 +34,13 @@
comment "DVB-S (satellite) frontends"
depends on DVB_CORE
+config DVB_CX24116
+ tristate "Conexant CX24116 based"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+
config DVB_STV0299
tristate "ST STV0299 based"
depends on DVB_CORE && I2C
diff -uNr multiproto/linux/drivers/media/dvb/frontends/Makefile
multiproto-test-hvr400/linux/drivers/media/dvb/frontends/Makefile
--- multiproto/linux/drivers/media/dvb/frontends/Makefile 2007-11-05
10:26:03.000000000 +0100
+++ multiproto-test-hvr400/linux/drivers/media/dvb/frontends/Makefile
2007-11-05 12:36:33.000000000 +0100
@@ -47,3 +47,4 @@
obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
obj-$(CONFIG_DVB_TUNER_QT1010) += qt1010.o
obj-$(CONFIG_DVB_TUA6100) += tua6100.o
+obj-$(CONFIG_DVB_CX24116) += cx24116.o
diff -uNr multiproto/linux/drivers/media/video/cx88/cx88-cards.c
multiproto-test-hvr400/linux/drivers/media/video/cx88/cx88-cards.c
--- multiproto/linux/drivers/media/video/cx88/cx88-cards.c 2007-11-05
10:26:03.000000000 +0100
+++ multiproto-test-hvr400/linux/drivers/media/video/cx88/cx88-cards.c
2007-11-05 12:36:14.000000000 +0100
@@ -1388,6 +1388,51 @@
.gpio0 = 0x07fa,
}},
},
+ [CX88_BOARD_HAUPPAUGE_HVR4000] = {
+ .name = "Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid",
+ .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT,
+ /*
+ * GPIO0 (WINTV2000)
+ *
+ * Analogue SAT DVB-T
+ * Antenna 0xc4bf 0xc4bb
+ * Composite 0xc4bf 0xc4bb
+ * S-Video 0xc4bf 0xc4bb
+ * Composite1 0xc4ff 0xc4fb
+ * S-Video1 0xc4ff 0xc4fb
+ */
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0xc4bf,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0xc4bf,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0xc4bf,
+ }},
+ /* fixme: Add radio support */
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_HAUPPAUGE_HVR4000LITE] = {
+ .name = "Hauppauge WinTV-HVR4000(Lite) DVB-S/S2",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ }},
+ .mpeg = CX88_MPEG_DVB,
+ },
};
const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
@@ -1698,6 +1743,26 @@
.subvendor = 0x1421,
.subdevice = 0x0390,
.card = CX88_BOARD_ADSTECH_PTV_390,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x6900,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x6904,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x6902,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x6905,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x6906,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE,
},
};
const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
@@ -1752,6 +1817,11 @@
case 14669: /* WinTV-HVR3000 (OEM, no IR, no b/panel video - Low
profile) */
case 28552: /* WinTV-PVR 'Roslyn' (No IR) */
case 34519: /* WinTV-PCI-FM */
+ case 69009: /* WinTV-HVR4000 (DVBS/S2/T, Video and IR, back panel
inputs) */
+ case 69100: /* WinTV-HVR4000LITE (DVBS/S2, IR) */
+ case 69500: /* WinTV-HVR4000LITE (DVBS/S2, No IR) */
+ case 69559: /* WinTV-HVR4000 (DVBS/S2/T, Video no IR, back panel
inputs) */
+ case 69569: /* WinTV-HVR4000 (DVBS/S2/T, Video no IR) */
case 90002: /* Nova-T-PCI (9002) */
case 92001: /* Nova-S-Plus (Video and IR) */
case 92002: /* Nova-S-Plus (Video and IR) */
@@ -1905,6 +1975,11 @@
cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
udelay(1000);
break;
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ /* Init GPIO to allow tuner to attach? */
+ cx_write(MO_GP0_IO, 0x0000c4bf);
+ udelay(1000);
+ break;
}
}
@@ -1938,6 +2013,8 @@
case CX88_BOARD_HAUPPAUGE_HVR1100LP:
case CX88_BOARD_HAUPPAUGE_HVR3000:
case CX88_BOARD_HAUPPAUGE_HVR1300:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
if (0 == core->i2c_rc)
hauppauge_eeprom(core,eeprom);
break;
diff -uNr multiproto/linux/drivers/media/video/cx88/cx88-dvb.c
multiproto-test-hvr400/linux/drivers/media/video/cx88/cx88-dvb.c
--- multiproto/linux/drivers/media/video/cx88/cx88-dvb.c 2007-11-05
10:26:03.000000000 +0100
+++ multiproto-test-hvr400/linux/drivers/media/video/cx88/cx88-dvb.c
2007-11-05 12:36:14.000000000 +0100
@@ -44,6 +44,7 @@
#include "nxt200x.h"
#include "cx24123.h"
#include "isl6421.h"
+#include "cx24116.h"
MODULE_DESCRIPTION("driver for cx2388x based DVB cards");
MODULE_AUTHOR("Chris Pascoe <[EMAIL PROTECTED]>");
@@ -372,6 +373,35 @@
.lnb_polarity = 1,
};
+static int cx24116_set_ts_param(struct dvb_frontend* fe,
+ int is_punctured)
+{
+ struct cx8802_dev *dev= fe->dvb->priv;
+ dev->ts_gen_cntrl = 0x2;
+
+ return 0;
+}
+
+static int cx24116_reset_device(struct dvb_frontend* fe)
+{
+ struct cx8802_dev *dev= fe->dvb->priv;
+ struct cx88_core *core = dev->core;
+
+ /* Reset the part */
+ cx_write(MO_SRST_IO, 0);
+ msleep(10);
+ cx_write(MO_SRST_IO, 1);
+ msleep(10);
+
+ return 0;
+}
+
+static struct cx24116_config hauppauge_hvr4000_config = {
+ .demod_address = 0x05,
+ .set_ts_params = cx24116_set_ts_param,
+ .reset_device = cx24116_reset_device,
+};
+
static int dvb_register(struct cx8802_dev *dev)
{
/* init struct videobuf_dvb */
@@ -625,6 +655,16 @@
dev->dvb.frontend->ops.set_voltage =
geniatech_dvbs_set_voltage;
}
break;
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
+ dev->dvb.frontend = dvb_attach(cx24116_attach,
+ &hauppauge_hvr4000_config,
+ &dev->core->i2c_adap);
+ if (dev->dvb.frontend) {
+ dvb_attach(isl6421_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x08, 0x00, 0x00);
+ }
+ break;
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported
yet\n",
dev->core->name);
diff -uNr multiproto/linux/drivers/media/video/cx88/cx88.h
multiproto-test-hvr400/linux/drivers/media/video/cx88/cx88.h
--- multiproto/linux/drivers/media/video/cx88/cx88.h 2007-11-05
10:26:03.000000000 +0100
+++ multiproto-test-hvr400/linux/drivers/media/video/cx88/cx88.h
2007-11-05 12:39:01.000000000 +0100
@@ -213,6 +213,8 @@
#define CX88_BOARD_TE_DTV_250_OEM_SWANN 55
#define CX88_BOARD_HAUPPAUGE_HVR1300 56
#define CX88_BOARD_ADSTECH_PTV_390 57
+#define CX88_BOARD_HAUPPAUGE_HVR4000 58
+#define CX88_BOARD_HAUPPAUGE_HVR4000LITE 59
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
@@ -310,6 +312,7 @@
u32 i2c_state, i2c_rc;
/* config info -- analog */
+ unsigned int boardnr;
unsigned int board;
unsigned int tuner_type;
unsigned int radio_type;
diff -uNr multiproto/linux/drivers/media/video/cx88/cx88-i2c.c
multiproto-test-hvr400/linux/drivers/media/video/cx88/cx88-i2c.c
--- multiproto/linux/drivers/media/video/cx88/cx88-i2c.c 2007-11-05
10:26:03.000000000 +0100
+++ multiproto-test-hvr400/linux/drivers/media/video/cx88/cx88-i2c.c
2007-11-05 12:36:14.000000000 +0100
@@ -243,7 +243,23 @@
core->i2c_rc = i2c_bit_add_bus(&core->i2c_adap);
if (0 == core->i2c_rc) {
+ static u8 tuner_data[] =
+ { 0x0b, 0xdc, 0x86, 0x52 };
+ static struct i2c_msg tuner_msg =
+ { .flags = 0, .addr = 0xc2 >> 1, .buf = tuner_data,
.len = 4 };
+
dprintk(1, "i2c register ok\n");
+
+ switch( core->boardnr )
+ {
+ case CX88_BOARD_HAUPPAUGE_HVR1300:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ printk("%s: i2c init: enabling analog demod on
HVR1300/4000 tuner\n",
+ core->name);
+ i2c_transfer(core->i2c_client.adapter, &tuner_msg, 1);
+ break;
+ }
+
if (i2c_scan)
do_i2c_scan(core->name,&core->i2c_client);
} else
diff -uNr multiproto/linux/drivers/media/video/cx88/cx88-input.c
multiproto-test-hvr400/linux/drivers/media/video/cx88/cx88-input.c
--- multiproto/linux/drivers/media/video/cx88/cx88-input.c 2007-11-05
10:26:03.000000000 +0100
+++ multiproto-test-hvr400/linux/drivers/media/video/cx88/cx88-input.c
2007-11-05 12:36:14.000000000 +0100
@@ -238,6 +238,8 @@
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR3000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
ir_codes = ir_codes_hauppauge_new;
ir_type = IR_TYPE_RC5;
ir->sampling = 1;
@@ -399,7 +401,7 @@
{
struct cx88_IR *ir = core->ir;
u32 samples, ircode;
- int i;
+ int i, start, range, toggle, dev, code;
if (NULL == ir)
return;
@@ -468,11 +470,23 @@
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR3000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
ir_dprintk("biphase decoded: %x\n", ircode);
- if ((ircode & 0xfffff000) != 0x3000)
+ /* split rc5 data block ... */
+ start = (ircode & 0x2000) >> 13;
+ range = (ircode & 0x1000) >> 12;
+ toggle= (ircode & 0x0800) >> 11;
+ dev = (ircode & 0x07c0) >> 6;
+ code = (ircode & 0x003f) | ((range << 6) ^ 0x0040);
+ if( start != 1)
+ /* no key pressed */
break;
- ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f, ircode);
+ if ( dev != 0x1e && dev != 0x1f )
+ /* not a hauppauge remote */
+ break;
+ ir_input_keydown(ir->input, &ir->ir, code, ircode);
ir->release = jiffies + msecs_to_jiffies(120);
break;
}
diff -uNr multiproto/linux/drivers/media/video/cx88/Kconfig
multiproto-test-hvr400/linux/drivers/media/video/cx88/Kconfig
--- multiproto/linux/drivers/media/video/cx88/Kconfig 2007-11-05
10:26:03.000000000 +0100
+++ multiproto-test-hvr400/linux/drivers/media/video/cx88/Kconfig
2007-11-05 12:36:14.000000000 +0100
@@ -56,6 +56,7 @@
select DVB_NXT200X if !DVB_FE_CUSTOMISE
select DVB_CX24123 if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
+ select DVB_CX24116 if !DVB_FE_CUSTOMISE
---help---
This adds support for DVB/ATSC cards based on the
Conexant 2388x chip.
diff -uNr multiproto/linux/drivers/media/video/tveeprom.c
multiproto-test-hvr400/linux/drivers/media/video/tveeprom.c
--- multiproto/linux/drivers/media/video/tveeprom.c 2007-11-05
10:26:03.000000000 +0100
+++ multiproto-test-hvr400/linux/drivers/media/video/tveeprom.c 2007-11-05
12:36:14.000000000 +0100
@@ -245,7 +245,7 @@
{ TUNER_ABSENT, "TCL M2523_3DBH_E"},
{ TUNER_ABSENT, "TCL M2523_3DIH_E"},
{ TUNER_ABSENT, "TCL MFPE05_2_U"},
- { TUNER_ABSENT, "Philips FMD1216MEX"},
+ { TUNER_PHILIPS_FMD1216ME_MK3, "Philips FMD1216MEX"},
{ TUNER_ABSENT, "Philips FRH2036B"},
{ TUNER_ABSENT, "Panasonic ENGF75_01GF"},
{ TUNER_ABSENT, "MaxLinear MXL5005"},
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
