[...]
>
> Since it is more than six months back, that the card could have been
> added, guess I'll try this next pointing at the state of affairs we have
> here now.
Missing commas tend to spread ... ;)
diff -r 27b2c6a80826 linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Nov 30
18:27:26 2007 +0200
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Tue Dec 04
00:06:19 2007 +0100
@@ -3600,6 +3600,36 @@ struct saa7134_board saa7134_boards[] =
.tv = 1,
}},
},
+ [SAA7134_BOARD_TWINHAN_DTV_DVB_3056] = {
+ .name = "Twinhan Hybrid DTV-DVB 3056 PCI",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tuner_config = 2,
+ .mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 0x0200000,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200000,
+ },
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -4369,7 +4399,13 @@ struct pci_device_id saa7134_pci_tbl[] =
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x4e42,
.subdevice = 0x3502,
- .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS
+ .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1822, /*Twinhan Technology Co. Ltd*/
+ .subdevice = 0x0022,
+ .driver_data = SAA7134_BOARD_TWINHAN_DTV_DVB_3056,
},{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
@@ -4782,6 +4818,7 @@ int saa7134_board_init2(struct saa7134_d
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
+ case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
diff -r 27b2c6a80826 linux/drivers/media/video/saa7134/saa7134-dvb.c
--- a/linux/drivers/media/video/saa7134/saa7134-dvb.c Fri Nov 30
18:27:26 2007 +0200
+++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c Mon Dec 03
19:05:39 2007 +0100
@@ -778,6 +778,21 @@ static struct tda1004x_config avermedia_
.request_firmware = philips_tda1004x_request_firmware
};
+static struct tda1004x_config twinhan_dtv_dvb_3056_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x42,
+ .tuner_address = 0x61,
+ .tuner_config = 2,
+ .antenna_switch = 1,
+ .request_firmware = philips_tda1004x_request_firmware
+};
+
/* ------------------------------------------------------------------
* special case: this card uses saa713x GPIO22 for the mode switch
*/
@@ -1043,6 +1058,8 @@ static int dvb_init(struct saa7134_dev *
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
configure_tda827x_fe(dev, &avermedia_super_007_config);
break;
+ case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
+ configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config);
default:
wprintk("Huh? unknown DVB card?\n");
break;
diff -r 27b2c6a80826 linux/drivers/media/video/saa7134/saa7134.h
--- a/linux/drivers/media/video/saa7134/saa7134.h Fri Nov 30 18:27:26
2007 +0200
+++ b/linux/drivers/media/video/saa7134/saa7134.h Mon Dec 03 18:16:32
2007 +0100
@@ -247,6 +247,7 @@ struct saa7134_format {
#define SAA7134_BOARD_SABRENT_TV_PCB05 115
#define SAA7134_BOARD_10MOONSTVMASTER3 116
#define SAA7134_BOARD_AVERMEDIA_SUPER_007 117
+#define SAA7134_BOARD_TWINHAN_DTV_DVB_3056 118
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
