It's really a pity that there's now interest in that bug although there are
about 10 FTA channels at 39° E that show that problem. :(
regards
Newsy
Newsy Paper <[EMAIL PROTECTED]> schrieb: Hi!
seems there is a bug with the hw pid filtering.
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 1
b2c2-flexcop: MAC address = 00:d0:d7:01:0b:58
b2c2-flexcop: found the stv0299 at i2c address: 0x68
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus
controlled by a 'FlexCopII' complete
Although the filtering is enabled it's not possible to watch tv channels of
transponders that have a bitrate > 42 mbit/s. With my VDR the transponders will
be read corretly, but when I try to watch one channel of such a transponder I
get many dropouts. In Windows these Tranponders are working just fine with
AltDvb2.2 while Altdvb 2.1 shows the same problem.
You can find some problem transponders on Hellassat 39°O each with SR 30000
FEC 7/8. On 16°O there is also a transponders with that problems, also 30000
7/8 but all streams are encrypted.
Is it a problem of the HW Pid filter? Are further SW Pid filters necessary? Or
is it even a bug in VDR?
kind regards
Newspaperman
---------------------------------
Beginnen Sie den Tag mit den neuesten Nachrichten. Machen Sie Yahoo! zu Ihrer
Startseite!
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb