my the dmesg reports cx88[0]/2: found at 0000:02:03.2, rev: 5, irq: 22, latency: 32, mmio: 0xdf000000 cx8802_probe() allocating 2 frontends cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=59] cx88[0]/2: cx2388x based DVB/ATSC card tda9887 5-0043: i2c i/o error: rc == -121 (should be 4) dvb: videobuf_dvb_register_adapter() DVB: registering new adapter (cx88[0]) dvb: videobuf_dvb_register_adapter() returns 0 DVB: registering frontend 0 (Conexant CX24116/CX24118)... DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
in dmesg-report I have two frontend0 - is it right ? really I have demux0 demux1 dvr0 dvr1 frontend0 frontend1 net0 net1 Igor -----Original Message----- From: "Craig Whitmore" <[EMAIL PROTECTED]> To: "Steven Toth" <[EMAIL PROTECTED]> Date: Wed, 30 Jan 2008 06:58:20 +1300 Subject: Re: [linux-dvb] [PATCH] HVR4000(lite) support for multiproto > > > > > Cool. > > > > This is based on the multi-frontend patches originally from the > > stoth/HVR3000 tree, right? > > > > - Steveьн > > > > > > Yes. based on your work . If you check the cx8802_dvb_advise_acquire it is > in quite a mess at the moment for the CX88_BOARD_HAUPPAUGE_HVR4000 so needs > fixing for the multi frontend. Someone who knows more about how to reset the > chips can fix it up a little. It boots but you get a few errors :-) > > Thanks > _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
