I followed the wiki and install all correctly but the scan (scan
/usr/share/dvb/dvb-t/fr-Lyon-Pilat) output is :
scanning /usr/share/dvb/dvb-t/fr-Lyon-Pilat
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 666000000 0 2 9 3 1 0 0
initial transponder 594000000 0 2 9 3 1 0 0
initial transponder 618000000 0 2 9 3 1 0 0
initial transponder 738000000 0 2 9 3 1 0 0
initial transponder 642000000 0 2 9 3 1 0 0
initial transponder 682000000 0 2 9 3 1 0 0
>>> tune to:
666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to:
594000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to:
618000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to:
738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to:
642000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to:
682000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.
dmesg output :
usb 3-1: new high speed USB device using ehci_hcd and address 6
usb 3-1: new device found, idVendor=15a4, idProduct=9016
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: DVB-T 2
usb 3-1: Manufacturer: Geniatech
usb 3-1: SerialNumber: 010101010600001
usb 3-1: configuration #1 chosen from 1 choice
dvb-usb: found a 'Afatech USB2.0 DVB-T Recevier' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
DVB: registering new adapter (Afatech USB2.0 DVB-T Recevier)
DVB: registering frontend 0 (AF901X USB DVB-T)...
dvb-usb: Afatech USB2.0 DVB-T Recevier successfully initialized and
connected.
input: Geniatech DVB-T 2 as /class/input/input9
input: USB HID v1.01 Keyboard [Geniatech DVB-T 2] on usb-0000:00:10.3-1
lsmod | grep dvb output :
dvb_usb_af9015 56544 4294967292
dvb_usb 24716 1 dvb_usb_af9015
dvb_core 78376 1 dvb_usb
firmware_class 13568 1 dvb_usb
i2c_core 27520 3 nvidia,dvb_usb,i2c_viapro
usbcore 124268 8
snd_usb_audio,dvb_usb_af9015,dvb_usb,snd_usb_lib,usbhid,ehci_hcd,uhci_hcd
The installed firmware is :
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/
I am running the opensuse 10.3 with the 2.6.22.17-0.1-default kernel.
Any idea ?
Guillaume
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
