It seems ok. Could you test a scan with kaffeine instead of looking for a
specific location? And if you do so it reports signal strenght?
By the way, what does it mean moi and moikka? Hello in finish?

Albert

2008/2/18, Antti Palosaari <[EMAIL PROTECTED]>:
>
> latest v4l-master + patch you give.
>
>
> regards
> Antti
>
> Albert Comerma wrote:
>
> > Uhm... that's strange, I don't have any of this cards to test, but other
> > people reported that this solution was working. Could you post the
> > dib0700_devices.c you're using to have a look?
> >
> > Albert
> >
>
> > 2008/2/18, Antti Palosaari <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>:
>
> >
> >     moi
> >     It does not work for me. It says same PID-filter timeout as I have
> got
> >     earlier. I don't have amplified antenna now, but I can say that all
> >     other DVB-T sticks I have are working with this small antenna. It
> could
> >     be that sensitivity of this hardware is bad or there is something
> wrong
> >     with driver or firmware. Lets try to test it Windows to see if it is
> >     working or not.
> >     Logs attached.
> >
> >
> >     regards
> >     Antti
> >
> >     Albert Comerma wrote:
> >
> >      > Hey people, we already solved this problems. I submitted a patch
> >     a few
> >      > days ago, but I think it's not on the current sources. I send
> >     again the
> >      > patch. Basically it must use the same frontend description as
> >     asus cards.
> >      >
> >      > Albert
> >      >
> >
> >      > 2008/2/18, Antti Palosaari <[EMAIL PROTECTED] <mailto:[EMAIL 
> > PROTECTED]>
>
> >     <mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>>:
>
> >
> >      >
> >      >     moikka
> >      >     I have also this device (express card). I haven't looked
> >     inside yet, but
> >      >     I think there is DibCOM STK7700D (in my understanding dual
> >     demod chip)
> >      >     and only *one* MT2266 tuner. I tried various GPIO settings
> but no
> >      >     luck yet.
> >      >     GPIO6 is for MT2266.
> >      >     GPIO9 and GPIO10 are for frontend.
> >      >
> >      >     Looks like tuner goes to correct frequency because I got
> always
> >      >     PID-filter timeouts when tuning to correct freq. I will now
> >     try to take
> >      >     some usb-sniffs to see configuration used. Any help is
> welcome.
> >      >
> >      >     regards
> >      >     Antti
> >      >
> >      >     Albert Comerma wrote:
> >      >      > Hi!, with Michel ([EMAIL PROTECTED]
> >     <mailto:[EMAIL PROTECTED]>
> >
> >      >     <mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>
> >     <mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
> >
>
> >      >     <mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>>)
> who
>
> >      >
> >      >      > is a owner of this Yuan card we added the device to
> >      >     dib0700_devices, and
> >      >      > we got it recognized without problems. The only problem is
> >     that no
> >      >      > channel is detected on scan on kaffeine or other
> software... I
> >      >     post some
> >      >      > dmesg. We don't know where it may be the problem... or how
> to
> >      >     detect it...
> >      >      >
> >      >      > usb 4-2: new high speed USB device using ehci_hcd and
> >     address 6
> >      >      > usb 4-2: new device found, idVendor=1164, idProduct=1edc
> >      >      > usb 4-2: new device strings: Mfr=1, Product=2,
> SerialNumber=3
> >      >      > usb 4-2: Product: STK7700D
> >      >      > usb 4-2: Manufacturer: YUANRD
> >      >      > usb 4-2: SerialNumber: 0000000001
> >      >      > usb 4-2: configuration #1 chosen from 1 choice
> >      >      > dvb-usb: found a 'Yuan EC372S' in cold state, will try to
> >     load a
> >      >     firmware
> >      >      > dvb-usb: downloading firmware from file
> >     'dvb-usb-dib0700-1.10.fw'
> >      >      > dib0700: firmware started successfully.
> >      >      > dvb-usb: found a 'Yuan EC372S' in warm state.
> >      >      > dvb-usb: will pass the complete MPEG2 transport stream to
> the
> >      >     software
> >      >      > demuxer.
> >      >      > DVB: registering new adapter (Yuan EC372S)
> >      >      > dvb-usb: no frontend was attached by 'Yuan EC372S'
> >      >      > dvb-usb: will pass the complete MPEG2 transport stream to
> the
> >      >     software
> >      >      > demuxer.
> >      >      > DVB: registering new adapter (Yuan EC372S)
> >      >      > DVB: registering frontend 1 (DiBcom 7000PC)...
> >      >      > MT2266: successfully identified
> >      >      > input: IR-receiver inside an USB DVB receiver as
> >     /class/input/input10
> >      >      > dvb-usb: schedule remote query interval to 150 msecs.
> >      >      > dvb-usb: Yuan EC372S successfully initialized and
> connected.
> >      >      >
> >      >      >
> >      >
> >      >      >
> >      >
> >
> ------------------------------------------------------------------------
> >      >      >
> >      >      > _______________________________________________
> >      >      > linux-dvb mailing list
> >
> >      >      > linux-dvb@linuxtv.org <mailto:linux-dvb@linuxtv.org>
>
> >     <mailto:linux-dvb@linuxtv.org <mailto:linux-dvb@linuxtv.org>>
>
> >
> >      >      > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >      >
> >      >
> >      >
> >      >     --
> >      >     http://palosaari.fi/
> >      >
> >      >
> >      >
> >      >
> >
> ------------------------------------------------------------------------
> >      >
> >      > _______________________________________________
> >      > linux-dvb mailing list
> >      > linux-dvb@linuxtv.org <mailto:linux-dvb@linuxtv.org>
> >      > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >
> >
> >     --
> >     http://palosaari.fi/
> >
> >
>
> >     Bus 001 Device 005: ID 1164:1edc YUAN High-Tech Development Co., Ltd
> >     Device Descriptor:
> >       bLength                18
> >       bDescriptorType         1
> >       bcdUSB               2.00
> >       bDeviceClass            0 (Defined at Interface level)
> >       bDeviceSubClass         0
> >       bDeviceProtocol         0
> >       bMaxPacketSize0        64
> >       idVendor           0x1164 YUAN High-Tech Development Co., Ltd
> >       idProduct          0x1edc
> >       bcdDevice            1.00
> >       iManufacturer           1 YUANRD
> >       iProduct                2 STK7700D
> >       iSerial                 3 0000000001
> >       bNumConfigurations      1
> >       Configuration Descriptor:
> >         bLength                 9
> >         bDescriptorType         2
> >         wTotalLength           46
> >         bNumInterfaces          1
> >         bConfigurationValue     1
> >         iConfiguration          0
> >         bmAttributes         0xa0
> >           Remote Wakeup
> >         MaxPower              500mA
> >         Interface Descriptor:
> >           bLength                 9
> >           bDescriptorType         4
> >           bInterfaceNumber        0
> >           bAlternateSetting       0
> >           bNumEndpoints           4
> >           bInterfaceClass       255 Vendor Specific Class
> >           bInterfaceSubClass      0
> >           bInterfaceProtocol      0
> >           iInterface              0
> >           Endpoint Descriptor:
> >             bLength                 7
> >             bDescriptorType         5
> >             bEndpointAddress     0x01  EP 1 OUT
> >             bmAttributes            2
> >               Transfer Type            Bulk
> >               Synch Type               None
> >               Usage Type               Data
> >             wMaxPacketSize     0x0200  1x 512 bytes
> >             bInterval               1
> >           Endpoint Descriptor:
> >             bLength                 7
> >             bDescriptorType         5
> >             bEndpointAddress     0x81  EP 1 IN
> >             bmAttributes            2
> >               Transfer Type            Bulk
> >               Synch Type               None
> >               Usage Type               Data
> >             wMaxPacketSize     0x0200  1x 512 bytes
> >             bInterval               1
> >           Endpoint Descriptor:
> >             bLength                 7
> >             bDescriptorType         5
> >             bEndpointAddress     0x82  EP 2 IN
> >             bmAttributes            2
> >               Transfer Type            Bulk
> >               Synch Type               None
> >               Usage Type               Data
> >             wMaxPacketSize     0x0200  1x 512 bytes
> >             bInterval               1
> >           Endpoint Descriptor:
> >             bLength                 7
> >             bDescriptorType         5
> >             bEndpointAddress     0x83  EP 3 IN
> >             bmAttributes            2
> >               Transfer Type            Bulk
> >               Synch Type               None
> >               Usage Type               Data
> >             wMaxPacketSize     0x0200  1x 512 bytes
> >             bInterval               1
> >     Device Qualifier (for other device speed):
> >       bLength                10
> >       bDescriptorType         6
> >       bcdUSB               2.00
> >       bDeviceClass            0 (Defined at Interface level)
> >       bDeviceSubClass         0
> >       bDeviceProtocol         0
> >       bMaxPacketSize0        64
> >       bNumConfigurations      1
> >
> >     Feb 18 23:50:53 localhost kernel: usb 1-8: USB disconnect, address 5
> >     Feb 18 23:50:55 localhost kernel: usb 1-8: new high speed USB device
> >     using ehci_hcd and address 6
> >     Feb 18 23:50:55 localhost kernel: usb 1-8: configuration #1 chosen
> >     from 1 choice
> >     Feb 18 23:50:55 localhost kernel: dib0700: loaded with support for 6
> >     different device-types
> >     Feb 18 23:50:55 localhost kernel: dvb-usb: found a 'Yuan EC372S' in
> >     cold state, will try to load a firmware
> >     Feb 18 23:50:55 localhost kernel: dvb-usb: downloading firmware from
> >     file 'dvb-usb-dib0700-1.10.fw'
> >     Feb 18 23:50:55 localhost kernel: dib0700: firmware started
> >     successfully.
> >     Feb 18 23:50:56 localhost kernel: dvb-usb: found a 'Yuan EC372S' in
> >     warm state.
> >     Feb 18 23:50:56 localhost kernel: dvb-usb: will pass the complete
> >     MPEG2 transport stream to the software demuxer.
> >     Feb 18 23:50:56 localhost kernel: DVB: registering new adapter (Yuan
> >     EC372S)
> >     Feb 18 23:50:56 localhost kernel: DVB: registering frontend 0
> >     (DiBcom 7000PC)...
> >     Feb 18 23:50:56 localhost kernel: MT2266: successfully identified
> >     Feb 18 23:50:56 localhost kernel: dvb-usb: Yuan EC372S successfully
> >     initialized and connected.
> >     Feb 18 23:50:56 localhost kernel: usbcore: registered new interface
> >     driver dvb_usb_dib0700
> >
> >     [EMAIL PROTECTED] linuxtv]$ scandvb fi-Oulu
> >     scanning fi-Oulu
> >     using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> >     initial transponder 634000000 0 2 9 3 1 2 0
> >     initial transponder 714000000 0 2 9 3 1 2 0
> >     initial transponder 738000000 0 2 9 3 1 2 0
> >     initial transponder 602000000 0 2 9 3 1 2 0
> >      >>> tune to:
> >
> 634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> >     WARNING: filter timeout pid 0x0011
> >     WARNING: filter timeout pid 0x0000
> >     WARNING: filter timeout pid 0x0010
> >      >>> tune to:
> >
> 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> >     WARNING: filter timeout pid 0x0011
> >     WARNING: filter timeout pid 0x0000
> >     WARNING: filter timeout pid 0x0010
> >      >>> tune to:
> >
> 738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> >     WARNING: filter timeout pid 0x0011
> >     WARNING: filter timeout pid 0x0000
> >     WARNING: filter timeout pid 0x0010
> >      >>> tune to:
> >
> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> >     WARNING: filter timeout pid 0x0011
> >     WARNING: filter timeout pid 0x0000
> >     WARNING: filter timeout pid 0x0010
> >     dumping lists (0 services)
> >     Done.
> >     [EMAIL PROTECTED] linuxtv]$
> >
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb@linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
> --
> http://palosaari.fi/
>
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Reply via email to