Mauro Carvalho Chehab wrote: >>> It is not that simple. Steven patch works for DTV on PCI Nano; Christopher >>> patches for some other DiVCO boards (DTV also); my port of Markus patch >>> >> for >> >>> other boards (tested by Dâniel Fraga - Analog TV). >>> >>> >> What does one board have to do with another? Just because these boards >> all use xceive tuners does not mean that they should be grouped together. >> > > No, but we have patches for all of them. > > >> Because the user has the ability to load cx8800 without cx88-dvb, and >> likewise, the user has the ability to load cx88-dvb without cx8800, the >> attach call must be fully qualified such that the other side of the >> driver is not required to be loaded in order for the tuner to work. >> > > If you take a look at the code, you'll see that all code is at cx88xx. This > module is loaded by cx8800, if you're using analog, or by cx8802, if you're > using cx88-dvb or cx88-blackbird. > > The code initializes xc3028 before tuner attach. > > >> In the case of FusionHDTV5 pci nano, there will never be an attach call >> from the analog side of the driver, since the tuner is hidden behind the >> s5h1409's i2c gate, and analog mode is not supported with the current >> driver. If you set i2c_scan=1 on the PCI nano, the xceive tuner will >> not even show up in the scan. >> > > The proper fix is to open the i2c gate before loading tuner. This will allow > i2c_scan to work and both analog and digital modes will work. Btw, this > somewhat similar to what dvico_fusionhdtv_hybrid_init() does on cx88-cards. > > I've added a patch that should open the bridge for s5h1409. Please test. Mauro,
It does not work. See my prior email in this thread for the explanation. [ 2912.355967] Linux video capture interface: v2.00 [ 2912.373470] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 2912.373536] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 2912.373601] cx88[0]: subsystem: 18ac:d530, board: DVICO HDTV5 PCI Nano [card=59,autodetected] [ 2912.373607] cx88[0]: TV tuner type 71, Radio tuner type -1 [ 2912.555088] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [ 2912.555111] cx88[0]/0: found at 0000:02:07.0, rev: 5, irq: 17, latency: 64, mmio: 0xe4000000 [ 2912.555184] cx88[0]/0: registered device video0 [v4l2] [ 2912.555215] cx88[0]/0: registered device vbi0 [ 2936.013682] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 2936.013886] cx88[0]/2: cx2388x 8802 Driver Manager [ 2936.013910] ACPI: PCI Interrupt 0000:02:07.2[A] -> GSI 19 (level, low) -> IRQ 17 [ 2936.013924] cx88[0]/2: found at 0000:02:07.2, rev: 5, irq: 17, latency: 64, mmio: 0xe6000000 [ 2936.051716] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 2936.051725] cx88/2: registering cx8802 driver, type: dvb access: shared [ 2936.051733] cx88[0]/2: subsystem: 18ac:d530, board: DVICO HDTV5 PCI Nano [card=59] [ 2936.051737] cx88[0]/2: cx2388x based DVB/ATSC card [ 2936.094831] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 2936.094837] cx88[0]/2: xc3028 attached [ 2936.095819] DVB: registering new adapter (cx88[0]) [ 2936.095825] DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... [ 2943.273085] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2944.378510] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2945.483933] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2946.589366] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2946.594186] xc2028 1-0061: Error on line 1068: -121 [ 2948.664531] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2949.765979] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2950.867404] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2951.968841] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2953.070277] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2954.171711] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2955.273151] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2956.374804] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2957.476020] xc2028 1-0061: xc2028/3028 firmware name not set! [ 2958.473772] xc2028 1-0061: Error on line 1068: -121 -Mike _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
