Simeon Simeonov wrote: > Hi Gernot, > > I can confirm that I have similar experience to yours. > By the way do you know if one can control from the soft side (register or > some other means) > the max current output for the card. I am having a problem when trying to > tune with a rotor. > On the Linux side the current seems to be capped at 300 mA as on the XP I see > it goes to > about 440 mA. I was still surprised that this card can supply less current > than the 102g but > we take what we get ...
The card has an auxiliary power supply i/p, which should be connected, if you are using a larger load. With a higher load and if you draw power from the PCI bus, it could be bad, as there are some limitations to the current drawn from a PCI slot. Also, you can set the SEC chip for a different current limitation. Regards, Manu _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
