Just replying to myself. Nobody has the same problems that I have with Skystar HD? Can someone please explain the current status of the driver? Is this the expected behavior, or I am doing something wrong?
Thank you, Vagelis NONAS EUAGGELOS wrote: > Hello, > > I have a Skystar HD. I use multiproto from here (checked it out yesterday): > http://jusst.de/hg/multiproto > It compiles fine, all needed modules are loaded automatically upon boot. > This is my dmesg: > saa7146: found saa7146 @ mem f88f2000 (revision 1, irq 21) (0x13c2,0x1019). > saa7146 (0): dma buffer size 192512 > DVB: registering new adapter (TT-Budget S2-3200 PCI) > adapter has MAC addr = 00:d0:5c:67:dd:91 > input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input3 > stb0899_write_regs [0xf1b6]: 02 > stb0899_write_regs [0xf1c2]: 00 > stb0899_write_regs [0xf1c3]: 00 > _stb0899_read_reg: Reg=[0xf000], data=82 > stb0899_get_dev_id: ID reg=[0x82] > stb0899_get_dev_id: Device ID=[8], Release=[2] > _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], > Offset=[0xf334], Data=[0x444d4431] > _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], > Offset=[0xf33c], Data=[0x00000001] > stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1] > _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], > Offset=[0xfa2c], Data=[0x46454331] > _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], > Offset=[0xfa34], Data=[0x00000001] > stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] > stb0899_attach: Attaching STB0899 > stb6100_attach: Attaching STB6100 > DVB: registering frontend 0 (STB0899 Multistandard)... > > I use scan from here: > http://jusst.de/manu/scan.tar.bz2 > It does not compile, I use the binary I found in the archive. > > I use szap2 from here: > http://www.free-x.de/vdr/patches/hdtv/szap2.tgz > It does compile. > > My kernel is: > 2.6.22-gentoo-r9 > > My problems are: > - When I scan the same transponder more than once, sometimes I get some > services, sometimes I get no services. > - When I zap (with szap2) to a station more than once, sometimes I get a > lock, sometimes I get no lock. > - I have also tried with vdr 1.4.7(old DVB API) and 1.5.14 (new dvb API). > Both versions can tune to only one channel, the "Active" channel from > previous vdr shutdown. When you change channel the signal is lost. I suppose > it relates to the zap problem. > > I would appreciate your help / suggestions. > > Thank you very much. > Vagelis > > > _______________________________________________ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > . > > _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb