Hi Craig,

Thanks for that, after some tinkering about and being able to read that site
I've got DVB-S and DVB-T working on the HVR4000. I've not been able to tune
any DVB-S2, but am working mainly with Myth, so not sure whats required for
S2 with that.

To get DVB-S and DVB-T working in Myth, I had my frontend0 and frontend1
showing in /dev/dvb/adapter0. I created a folder /dev/dvb/adatper1 and
linked frontend0 (and the dvb, net and demux) in that folder into
/dev/dvb/adapter0/frontend1 and so on. That got me around Myth being unable
to handle multifrontends (I'm using Ubuntu feeds, building Myth from source
and patching is a job I'd need a spare weekend for!). I was able to set up
dvb cards and access the types happily that way.

The only thing with Myth that's maybe important to note is you must switch
off EIT scanning. I did not realise this at first and watching DVB-S
channels, every 10 minutes or so Myth would crash. Watching the backend log,
I saw the EIT scan kicking in and trying to access the DVB-T tuner whilst I
was watching the DVB-S channels. Obviously this caused a conflict, so by
turning off EIT scan I've had no problems since.

Hope that helps someone else struggling, and thanks for your pointers Craig,

Ian


On 23/02/2008, Craig Whitmore <[EMAIL PROTECTED]> wrote:
>
> > Can anyone please make a clear guide on what I should do to get my HVR4k
> > going properly with Myth? If I can't get things going 'properly' just
> > being able
>   > to help beta stuff would be good. What SVN do I need to check-out?
> What
> patches do I need to apply? What Myth do I need to check out? Then what
> > patches does that need?
>
>
> If you check
> http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000
> there are links how to get:
>
> - Single Frontend (Either DVB-S or DVB-T)
> - Multi Frontend Going (DVB-S and DVB-T)
> - Multi Proto Going (DVB-S/S2 or DVB-T)
> - Multi Proto with Multi Frontends (DVB-S/S2 and DVB-T)
> ..
> Thanks
>
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Reply via email to