Hi there,

I've got the following card: http://www.twinhan.com/product_cable_2033.asp

I am running Ubunu 7.10 with kernel 2.6.22-14-generic

I have compiled and installed the latest drivers from http://jusst.de/hg/mantis 
and it seems to detect the card correctly but when scanning for channels it 
fails.
The card works correctly in windows.

This is what dmesg gives me:
...
[ 4022.137802] found a VP-2033 PCI DVB-C device on (05:05.0),
[ 4022.137803]     Mantis Rev 1 [1822:0008], irq: 23, latency: 64
[ 4022.137805]     memory: 0xfdaff000, mmio: 0xf8abc000
[ 4022.140491]     MAC Address=[00:08:ca:1c:2e:4b]
[ 4022.140502] mantis_alloc_buffers (0): DMA=0x2e830000 cpu=0xee830000 
size=65536
[ 4022.140506] mantis_alloc_buffers (0): RISC=0x2e819000 cpu=0xee819000 
size=1000
[ 4022.140508] DVB: registering new adapter (Mantis dvb adapter)
[ 4022.656841] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
[ 4022.658236] TDA10021: i2c-addr = 0x0c, id = 0x7d
[ 4022.658238] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend 
(TDA10021) @ 0x0c
[ 4022.658240] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend 
attach success
[ 4022.658243] DVB: registering frontend 0 (Philips TDA10021 DVB-C)...
...

When trying to scan it simply gives me the following result:

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 370000000 6875000 0 3
>>> tune to: 370000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING:>>> tuning failed!!!
>>> tune to: 370000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 (tuning failed)
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING:>>> tuning failed!!!

Is there any way i can debug the driver to see where it goes wrong?
If there is anything i can do, I would be glad to help out.

Any help would be greatly appreciated.

Best regards,
Rikard Wissing

_________________________________________________________________
Mörkt och kallt? Kanske Barcelona?
http://search.live.com/results.aspx?q=Barcelona+reseguide&form=QBRE
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Reply via email to