Hi Tero, I also have a Terratec Cinergy DT XS diversity but can't get it working with the Cinergy CI usb, do you have any idea how I can make it work? By the way, they showed on CEBIT a EeePC with linux on it with the Cinergy XSS. They also said that they will release linux drivers for all of their tv tuners.
Regards On Mon, Mar 10, 2008 at 12:17 PM, Tero Pelander <[EMAIL PROTECTED]> wrote: > The driver in linux kernel 2.6.24.2 for "Terratec Cinergy DT usb XS > diversity" sets the reported bandwith outside the fe_bandwidth_t range. > The value 0 (BANDWIDTH_8_MHZ) is replaced with 8000. Here is an example > showing the problem... > > Device: Terratec Cinergy DT usb xs diversity > Linux: 2.6.24.2 (modules: mt2266, dvb_usb_dib0700) > Firmware: dvb-usb-dib0700-1.10.fw > > > Received event for frontend 0 > > Status for frontend 0 is now: > 0 (no signal) > > Reported parameters for frontend 0 are now: > Frequency: 714000000 Hz > Inversion: AUTO (2) > Bandwidth: 8 (0) > High priority stream code rate: AUTO (9) > Low priority stream code rate: AUTO (9) > Constellation: QAM64 (3) > Transmission mode: AUTO (2) > Guard interval: AUTO (4) > Hierarchy information: AUTO (4) > > Received event for frontend 0 > > Status for frontend 0 is now: > FE_HAS_SIGNAL (found something above the noise level) > FE_HAS_CARRIER (found a DVB signal) > FE_HAS_VITERBI (FEC is stable) > FE_HAS_SYNC (found sync bytes) > FE_HAS_LOCK (everything's working) > > Reported parameters for frontend 0 are now: > Frequency: 714000000 Hz > Inversion: AUTO (2) > Bandwidth: ??? (8000) > High priority stream code rate: 2/3 (2) > Low priority stream code rate: 1/2 (1) > Constellation: QAM64 (3) > Transmission mode: 8K (1) > Guard interval: 1/8 (2) > Hierarchy information: NONE (0) > > _______________________________________________ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >
_______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
