Hi, Tim timf schrieb: > On Fri, 2008-03-07 at 21:32 +0100, Hartmut Hackmann wrote: >> Hi, Tim >> >> timf schrieb: >>> Hi Hartmut, >>> I noticed you had a bit to do with implementing this card. >>> >>> With a fresh install of ubuntu 7.10 (kernel i386 2.6.22-14-generic), >>> the card is auto recognised as: Kworld DVB-T 210 (card=114) >>> >>> However, tda1004 firmware does not load. >>> Used download-firmware, placed dvb-fe-tda10046.fw >>> into /lib/firmware/2.6.22-14-generic >>> >>> Rebooted. >>> >>> Now, again card is recognised, firmware recognised as version 20. >>> Here is the strange part: >>> - using dvb-utils scan, each time I run that I get a different result in >>> channels. >>> - I try to scan with Kaffeine - nothing >>> - I try to scan with Me-tv - nothing >>> - I try to scan with tvtime - all channels obtained ( no audio). >>> >>> Now, after reboot, if I first start tvtime (analog tv), view a channel, >>> turn tvtime off, and then : >>> - if I place a previously good channels.dvb in Kaffeine - it plays all >>> channels. >>> - if I place a previously good channels.conf in Me-tv - it plays all >>> channels. >>> >>> Would it be correct to say that the "switch" is not working for DVB >>> after boot? >>> >>> I have studied the code, but I need your help to point me in the right >>> direction. >>> >>> Thanks, >>> Tim >>> >> Hermann reported something similar. I have an idea what the reason could >> be. Please let me check. >> Best regards >> Hartmut > > Hi Hartmut, > > Further to this, is the Remote Control meant to work for this card? > <snip> Looks like the Remote is not supported. I can't help here since i don't have access to this card.
In my personal Repository: http://linuxtv.org/hg/~hhackmann/v4l-dvb/ the problems with the tuning code should be fixed. Can you please give it a try? Best Regards Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb