Hi I have been trying to scan the channels using Hauppauge wintv nova-s-plus card (conexant Chipset no cx23883-39) on RHEL im getting the output as "No such device or address" what is this?Could you please help me with this? I have provided the version info below and my findings below. Thanks in advance... ======================================= Im using
RHEL 3.4.4 Kernel version 2.6.9 Hauppauge wintv nova-s-plus card (Chipset no cx23883-39) after inserting the information about the card to cx88-cards.c when i run xawtv –hwscan, I see the following output This is xawtv -3.95, running on Linux | i686 (2.6.9-prep) looking for available devices port 69-69 type : X video, image scaler. name : intel(R) video overlay driver = /dev/video0 ; device = Hauppauge Nova-s-Plus DVB-S when i'm tring to scan the following FATAL message is came using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 6 No such device or address The following is the output of dmesg: Linux video capture interface: v1.00 cx2388x v4l2 driver version 0.0.4 loaded ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) -> IRQ 217 cx8800[0]: found at 0000:01:0a.0, rev: 5, irq: 217, latency: 64, mmio: 0xfa000000 cx8800[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected] cx8800[0]: i2c register ok cx8800[0]: registered device video0 [v4l2] cx8800[0]: registered device vbi0 cx8800[0]: cx88: tvaudio thread started IA-32 Microcode Update Driver v1.14 unregistered cx8800[0]: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO cx8800[0]: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex cx8800[0]: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO eth0: no IPv6 routers present mdrbdr: disagrees about version of symbol struct_module cx8800[0]: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO lp: driver loaded but no devices found cx8800[0]: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO tveeprom: Encountered bad packet header [17]. Corrupt or not a Hauppauge eeprom. cx8800[0]: i2c attach [client=tveeprom] ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.9-prep SMP 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: ==================== END INIT IVTV =================== The following is the output of lsmod | grep cx88: cx8800 47388 0 cx88xx 29188 1 cx8800 video_buf 24836 3 saa7146_vv,cx8800,cx88xx i2c_algo_bit 12808 2 ivtv,cx8800 v4l1_compat 16260 2 saa7146_vv,cx8800 v4l2_common 10240 2 saa7146_vv,cx8800 btcx_risc 8840 2 cx8800,cx88xx videodev 13952 3 saa7146_vv,ivtv,cx8800 i2c_core 26240 30 dvb_usb_dibusb_mb,dvb_usb,b2c2_flexcop,dvb_ttusb_budget,budget_av,budget_ci,budget,budget_core, dvb_ttpci,ttpci_eeprom,nxt2002,stv0297,mt352,mt312,cx22702,cx24110,tda8083,l64781,dib3000_common, tda10021,tda1004x,ves1820,stv0299,cx22700,sp8870,ves1x93,tveeprom,cx8800,cx88xx,i2c_algo_bit Explore your hobbies and interests. Go to http://in.promos.yahoo.com/groups _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb