We could load it high if it is more than 2G when kernel support
LOAD_ABOVE_4G.

-v2: Use macro instead of (1<<1) directly for LOAD_ABOVE_4G.

Signed-off-by: Yinghai Lu <ying...@kernel.org>

---
 loaders/bzimage/bzimage.c |    9 ++++++++-
 loaders/bzimage/bzimage.h |   15 +++++++++++++--
 2 files changed, 21 insertions(+), 3 deletions(-)

Index: efilinux/loaders/bzimage/bzimage.c
===================================================================
--- efilinux.orig/loaders/bzimage/bzimage.c
+++ efilinux/loaders/bzimage/bzimage.c
@@ -130,7 +130,9 @@ static void parse_initrd(EFI_LOADED_IMAG
        if (err != EFI_SUCCESS)
                goto close_handles;
 
-       if ((UINTN)addr > boot_params->hdr.ramdisk_max) {
+       if ((boot_params->hdr.version < 0x20c ||
+            !(boot_params->hdr.xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G)) &&
+           (UINTN)addr > boot_params->hdr.ramdisk_max) {
                Print(L"ramdisk address is too high!\n");
                efree(addr, size);
                goto close_handles;
@@ -138,6 +140,11 @@ static void parse_initrd(EFI_LOADED_IMAG
 
        boot_params->hdr.ramdisk_start = (UINT32)(UINTN)addr;
        boot_params->hdr.ramdisk_len = (UINT32)size;
+       if (boot_params->hdr.version >= 0x20c &&
+           (boot_params->hdr.xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G)) {
+               boot_params->ext_ramdisk_image = (UINT64)(UINTN)addr >> 32;
+               boot_params->ext_ramdisk_size = size >> 32;
+       }
 
        for (j = 0; j < nr_initrds; j++) {
                struct initrd *rd = &initrds[j];
Index: efilinux/loaders/bzimage/bzimage.h
===================================================================
--- efilinux.orig/loaders/bzimage/bzimage.h
+++ efilinux/loaders/bzimage/bzimage.h
@@ -40,6 +40,13 @@
 #define E820_NVS               4
 #define E820_UNUSABLE          5
 
+/* xloadflags */
+#define XLF_KERNEL_64                   (1<<0)
+#define XLF_CAN_BE_LOADED_ABOVE_4G      (1<<1)
+#define XLF_EFI_HANDOVER_32             (1<<2)
+#define XLF_EFI_HANDOVER_64             (1<<3)
+#define XLF_EFI_KEXEC                   (1<<4)
+
 struct setup_header {
        UINT8 setup_secs;       /* Sectors for setup code */
        UINT16 root_flags;
@@ -69,7 +76,8 @@ struct setup_header {
        UINT32 ramdisk_max;    /* Highest legal initrd address */
        UINT32 kernel_alignment; /* Physical addr alignment required for kernel 
*/
        UINT8 relocatable_kernel; /* Whether kernel is relocatable or not */
-       UINT8 _pad2[3];
+       UINT8 min_alignment;
+       UINT16 xloadflags;
        UINT32 cmdline_size;
        UINT32 hardware_subarch;
        UINT64 hardware_subarch_data;
@@ -148,7 +156,10 @@ struct boot_params {
        UINT8 hd1_info[16];
        UINT8 sys_desc_table[0x10];
        UINT8 olpc_ofw_header[0x10];
-       UINT8 _pad4[128];
+       UINT32 ext_ramdisk_image;
+       UINT32 ext_ramdisk_size;
+       UINT32 ext_cmd_line_ptr;
+       UINT8 _pad4[116];
        UINT8 edid_info[0x80];
        struct efi_info efi_info;
        UINT32 alt_mem_k;
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to