Since arm64 does not use a builtin decompressor, the EFI stub is built into the kernel proper. So far, this has been working fine, but actually, since the stub is in fact a PE/COFF relocatable binary that is executed at an unknown offset in the 1:1 mapping provided by the UEFI firmware, we should not be seamlessly sharing code with the kernel proper, which is a position dependent executable linked at a high virtual offset.
So instead, separate the contents of libstub and its dependencies, by putting them into their own namespace by prefixing all of its symbols with __efistub. This way, we have tight control over what parts of the kernel proper are referenced by the stub. Signed-off-by: Ard Biesheuvel <[email protected]> --- arch/arm64/kernel/Makefile | 12 +++++++-- arch/arm64/kernel/efi-entry.S | 10 ++++---- arch/arm64/kernel/head.S | 14 +++++------ arch/arm64/kernel/image.h | 26 ++++++++++++++++++++ drivers/firmware/efi/libstub/Makefile | 16 +++++++++--- drivers/firmware/efi/libstub/fdt.c | 8 ++++++ 6 files changed, 69 insertions(+), 17 deletions(-) diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 22dc9bc781be..7b17f6245f1e 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -20,6 +20,14 @@ arm64-obj-y := debug-monitors.o entry.o irq.o fpsimd.o \ cpufeature.o alternative.o cacheinfo.o \ smp.o smp_spin_table.o topology.o +stub-obj := efi-stub.o efi-entry.o +extra-y := $(stub-obj) +stub-obj := $(patsubst %.o,%.stub.o,$(stub-obj)) + +OBJCOPYFLAGS := --prefix-symbols=__efistub_ +$(obj)/%.stub.o: $(obj)/%.o FORCE + $(call if_changed,objcopy) + arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \ sys_compat.o entry32.o \ ../../arm/kernel/opcodes.o @@ -32,7 +40,7 @@ arm64-obj-$(CONFIG_CPU_PM) += sleep.o suspend.o arm64-obj-$(CONFIG_CPU_IDLE) += cpuidle.o arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o arm64-obj-$(CONFIG_KGDB) += kgdb.o -arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o +arm64-obj-$(CONFIG_EFI) += efi.o $(stub-obj) arm64-obj-$(CONFIG_PCI) += pci.o arm64-obj-$(CONFIG_ARMV8_DEPRECATED) += armv8_deprecated.o arm64-obj-$(CONFIG_ACPI) += acpi.o @@ -40,7 +48,7 @@ arm64-obj-$(CONFIG_ACPI) += acpi.o obj-y += $(arm64-obj-y) vdso/ obj-m += $(arm64-obj-m) head-y := head.o -extra-y := $(head-y) vmlinux.lds +extra-y += $(head-y) vmlinux.lds # vDSO - this must be built first to generate the symbol offsets $(call objectify,$(arm64-obj-y)): $(obj)/vdso/vdso-offsets.h diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S index 8ce9b0577442..a773db92908b 100644 --- a/arch/arm64/kernel/efi-entry.S +++ b/arch/arm64/kernel/efi-entry.S @@ -29,7 +29,7 @@ * we want to be. The kernel image wants to be placed at TEXT_OFFSET * from start of RAM. */ -ENTRY(efi_stub_entry) +ENTRY(entry) /* * Create a stack frame to save FP/LR with extra space * for image_addr variable passed to efi_entry(). @@ -86,8 +86,8 @@ ENTRY(efi_stub_entry) * entries for the VA range of the current image, so no maintenance is * necessary. */ - adr x0, efi_stub_entry - adr x1, efi_stub_entry_end + adr x0, entry + adr x1, entry_end sub x1, x1, x0 bl __flush_dcache_area @@ -120,5 +120,5 @@ efi_load_fail: ldp x29, x30, [sp], #32 ret -efi_stub_entry_end: -ENDPROC(efi_stub_entry) +entry_end: +ENDPROC(entry) diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index a055be6125cf..e8f52943ac65 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -120,8 +120,8 @@ efi_head: #endif #ifdef CONFIG_EFI - .globl stext_offset - .set stext_offset, stext - efi_head + .globl __efistub_stext_offset + .set __efistub_stext_offset, stext - efi_head .align 3 pe_header: .ascii "PE" @@ -144,8 +144,8 @@ optional_header: .long _end - stext // SizeOfCode .long 0 // SizeOfInitializedData .long 0 // SizeOfUninitializedData - .long efi_stub_entry - efi_head // AddressOfEntryPoint - .long stext_offset // BaseOfCode + .long __efistub_entry - efi_head // AddressOfEntryPoint + .long __efistub_stext_offset // BaseOfCode extra_header_fields: .quad 0 // ImageBase @@ -162,7 +162,7 @@ extra_header_fields: .long _end - efi_head // SizeOfImage // Everything before the kernel image is considered part of the header - .long stext_offset // SizeOfHeaders + .long __efistub_stext_offset // SizeOfHeaders .long 0 // CheckSum .short 0xa // Subsystem (EFI application) .short 0 // DllCharacteristics @@ -207,9 +207,9 @@ section_table: .byte 0 .byte 0 // end of 0 padding of section name .long _end - stext // VirtualSize - .long stext_offset // VirtualAddress + .long __efistub_stext_offset // VirtualAddress .long _edata - stext // SizeOfRawData - .long stext_offset // PointerToRawData + .long __efistub_stext_offset // PointerToRawData .long 0 // PointerToRelocations (0 for executables) .long 0 // PointerToLineNumbers (0 for executables) diff --git a/arch/arm64/kernel/image.h b/arch/arm64/kernel/image.h index 8fae0756e175..0475aef621ff 100644 --- a/arch/arm64/kernel/image.h +++ b/arch/arm64/kernel/image.h @@ -59,4 +59,30 @@ _kernel_offset_le = DATA_LE64(TEXT_OFFSET); \ _kernel_flags_le = DATA_LE64(__HEAD_FLAGS); +#ifdef CONFIG_EFI + +/* + * The EFI stub has its own symbol namespace prefixed by __efistub_, to + * isolate it from the kernel proper. The following symbols are legally + * accessed by the stub, so provide some aliases to make them accessible. + * Only include data symbols here, or text symbols of functions that are + * known to be safe when executed at another offset than they were linked at. + */ +__efistub_memcmp = memcmp; +__efistub_memchr = memchr; +__efistub_memcpy = memcpy; +__efistub_memmove = memmove; +__efistub_memset = memset; +__efistub_strlen = strlen; +__efistub_strncmp = strncmp; +__efistub_strstr = strstr; +__efistub___flush_dcache_area = __flush_dcache_area; + +__efistub_linux_banner = linux_banner; +__efistub__text = _text; +__efistub__end = _end; +__efistub__edata = _edata; + +#endif + #endif /* __ASM_IMAGE_H */ diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile index 816dbe9f4b82..5de9ca0d3ead 100644 --- a/drivers/firmware/efi/libstub/Makefile +++ b/drivers/firmware/efi/libstub/Makefile @@ -10,10 +10,12 @@ cflags-$(CONFIG_X86) += -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 \ -fPIC -fno-strict-aliasing -mno-red-zone \ -mno-mmx -mno-sse -DDISABLE_BRANCH_PROFILING -cflags-$(CONFIG_ARM64) := $(subst -pg,,$(KBUILD_CFLAGS)) +cflags-$(CONFIG_ARM64) := $(subst -pg,,$(KBUILD_CFLAGS)) -fpic cflags-$(CONFIG_ARM) := $(subst -pg,,$(KBUILD_CFLAGS)) \ -fno-builtin -fpic -mno-single-pic-base +cflags-$(CONFIG_EFI_PARAMS_FROM_FDT) += -I$(srctree)/scripts/dtc/libfdt + KBUILD_CFLAGS := $(cflags-y) \ $(call cc-option,-ffreestanding) \ $(call cc-option,-fno-stack-protector) @@ -22,7 +24,15 @@ GCOV_PROFILE := n KASAN_SANITIZE := n lib-y := efi-stub-helper.o -lib-$(CONFIG_EFI_ARMSTUB) += arm-stub.o fdt.o + +# include the stub's generic dependencies from lib/ when building for ARM/arm64 +arm-deps := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c fdt_empty_tree.c fdt_sw.c sort.c + +$(obj)/lib-%.o: $(srctree)/lib/%.c FORCE + $(call if_changed_rule,cc_o_c) + +lib-$(CONFIG_EFI_ARMSTUB) += arm-stub.o fdt.o \ + $(patsubst %.c,lib-%.o,$(arm-deps)) # # arm64 puts the stub in the kernel proper, which will unnecessarily retain all @@ -34,6 +44,6 @@ lib-$(CONFIG_EFI_ARMSTUB) += arm-stub.o fdt.o extra-$(CONFIG_ARM64) := $(lib-y) lib-$(CONFIG_ARM64) := $(patsubst %.o,%.init.o,$(lib-y)) -OBJCOPYFLAGS := --prefix-alloc-sections=.init +OBJCOPYFLAGS := --prefix-alloc-sections=.init --prefix-symbols=__efistub_ $(obj)/%.init.o: $(obj)/%.o FORCE $(call if_changed,objcopy) diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c index ef5d764e2a27..b04cb468d79f 100644 --- a/drivers/firmware/efi/libstub/fdt.c +++ b/drivers/firmware/efi/libstub/fdt.c @@ -16,6 +16,14 @@ #include "efistub.h" +/* + * We want the stub to access linux_banner via a relative reference and not via + * the GOT. Since the default visibility set on the GCC command line does not + * apply to external declarations, we need to add it explicitly here (or via + * a pragma). + */ +extern __attribute__((visibility("hidden"))) const char linux_banner[]; + efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt, unsigned long orig_fdt_size, void *fdt, int new_fdt_size, char *cmdline_ptr, -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-efi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
