Add touchscreen info for the Chuwi Vi8 Plus tablet. This tablet uses a
Chipone ICN8505 touchscreen controller, with the firmware used by the
touchscreen embedded in the EFI firmware.

Acked-by: Andy Shevchenko <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
---
Changes in v6:
-Switch from crc sums to SHA256 hashes for the firmware hash
---
 drivers/platform/x86/touchscreen_dmi.c | 28 ++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c 
b/drivers/platform/x86/touchscreen_dmi.c
index 8eb88bfcacbe..99eb73bbd1a0 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -359,6 +359,25 @@ static const struct ts_dmi_data onda_v891w_v1_data = {
        .properties     = onda_v891w_v1_props,
 };
 
+static const struct property_entry efi_embedded_fw_props[] = {
+       PROPERTY_ENTRY_BOOL("efi-embedded-firmware"),
+       { }
+};
+
+static const struct ts_dmi_data chuwi_vi8_plus_data = {
+       .embedded_fw = {
+               .name   = "chipone/icn8505-HAMP0002.fw",
+               .prefix = { 0xb0, 0x07, 0x00, 0x00, 0xe4, 0x07, 0x00, 0x00 },
+               .length = 35012,
+               .sha256 = { 0x93, 0xe5, 0x49, 0xe0, 0xb6, 0xa2, 0xb4, 0xb3,
+                           0x88, 0x96, 0x34, 0x97, 0x5e, 0xa8, 0x13, 0x78,
+                           0x72, 0x98, 0xb8, 0x29, 0xeb, 0x5c, 0xa7, 0xf1,
+                           0x25, 0x13, 0x43, 0xf4, 0x30, 0x7c, 0xfc, 0x7c },
+       },
+       .acpi_name      = "CHPN0001:00",
+       .properties     = efi_embedded_fw_props,
+};
+
 const struct dmi_system_id touchscreen_dmi_table[] = {
        {
                /* CUBE iwork8 Air */
@@ -587,6 +606,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
                        DMI_EXACT_MATCH(DMI_BIOS_VERSION, "ONDA.W89EBBN08"),
                },
        },
+       {
+               /* Chuwi Vi8 Plus (CWI506) */
+               .driver_data = (void *)&chuwi_vi8_plus_data,
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"),
+                       DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+               },
+       },
        { },
 };
 
-- 
2.17.0

--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to