Signed-off-by: Albin Tonnerre <albin.tonne...@free-electrons.com>
---
lib/Kconfig | 4 ++++
lib/Makefile | 1 +
lib/decompress.c | 5 +++++
usr/Kconfig | 25 ++++++++++++++++++++-----
4 files changed, 30 insertions(+), 5 deletions(-)
diff --git a/lib/Kconfig b/lib/Kconfig
index bb1326d..8639349 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -117,6 +117,10 @@ config DECOMPRESS_BZIP2
config DECOMPRESS_LZMA
tristate
+config DECOMPRESS_LZO
+ select LZO_DECOMPRESS
+ tristate
+
#
# Generic allocator support is selected if needed
#
diff --git a/lib/Makefile b/lib/Makefile
index b6d1857..cd3d37b 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
+lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o
obj-$(CONFIG_TEXTSEARCH) += textsearch.o
obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
diff --git a/lib/decompress.c b/lib/decompress.c
index d2842f5..a760681 100644
--- a/lib/decompress.c
+++ b/lib/decompress.c
@@ -9,6 +9,7 @@
#include <linux/decompress/bunzip2.h>
#include <linux/decompress/unlzma.h>
#include <linux/decompress/inflate.h>
+#include <linux/decompress/unlzo.h>
#include <linux/types.h>
#include <linux/string.h>
@@ -22,6 +23,9 @@
#ifndef CONFIG_DECOMPRESS_LZMA
# define unlzma NULL
#endif
+#ifndef CONFIG_DECOMPRESS_LZO
+# define unlzo NULL
+#endif
static const struct compress_format {
unsigned char magic[2];
@@ -32,6 +36,7 @@ static const struct compress_format {
{ {037, 0236}, "gzip", gunzip },
{ {0x42, 0x5a}, "bzip2", bunzip2 },
{ {0x5d, 0x00}, "lzma", unlzma },
+ { {0x89, 0x4c}, "lzo", unlzo },
{ {0, 0}, NULL, NULL }
};
diff --git a/usr/Kconfig b/usr/Kconfig
index 1c3039f..04a826e 100644
--- a/usr/Kconfig
+++ b/usr/Kconfig
@@ -72,6 +72,15 @@ config RD_LZMA
Support loading of a LZMA encoded initial ramdisk or cpio buffer
If unsure, say N.
+config RD_LZO
+ bool "Support initial ramdisks compressed using LZO" if EMBEDDED
+ default !EMBEDDED
+ depends on BLK_DEV_INITRD
+ select DECOMPRESS_LZO
+ help
+ Support loading of a LZO encoded initial ramdisk or cpio buffer
+ If unsure, say N.
+
choice
prompt "Built-in initramfs compression mode" if INITRAMFS_SOURCE!=""
help
@@ -108,16 +117,15 @@ config INITRAMFS_COMPRESSION_GZIP
bool "Gzip"
depends on RD_GZIP
help
- The old and tried gzip compression. Its compression ratio is
- the poorest among the 3 choices; however its speed (both
- compression and decompression) is the fastest.
+ The old and tried gzip compression. It provides a good balance
+ between compression ration and decompression speed.
config INITRAMFS_COMPRESSION_BZIP2
bool "Bzip2"
depends on RD_BZIP2
help
Its compression ratio and speed is intermediate.
- Decompression speed is slowest among the three. The initramfs
+ Decompression speed is slowest among the four. The initramfs
size is about 10% smaller with bzip2, in comparison to gzip.
Bzip2 uses a large amount of memory. For modern kernels you
will need at least 8MB RAM or more for booting.
@@ -128,7 +136,14 @@ config INITRAMFS_COMPRESSION_LZMA
help
The most recent compression algorithm.
Its ratio is best, decompression speed is between the other
- two. Compression is slowest. The initramfs size is about 33%
+ three. Compression is slowest. The initramfs size is about 33%
smaller with LZMA in comparison to gzip.
+config INITRAMFS_COMPRESSION_LZO
+ bool "LZO"
+ depends on RD_LZO
+ help
+ Its compression ratio is the poorest among the four. The kernel
+ size is about about 10% bigger than gzip; however its speed
+
endchoice
--
Albin Tonnerre, Free Electrons
Kernel, drivers and embedded Linux development,
consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-embedded" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
