From: Ohad Ben-Cohen <o...@wizery.com>

To save power, the pull-up resistor on CD/DAT[3] (pin 1)
of the card can be disconnected. This is desired, e.g.,
with embedded SDIO devices which do not rely on this pin
for card detection.

Signed-off-by: Ohad Ben-Cohen  <o...@wizery.com>
---
 drivers/mmc/core/sdio.c  |   32 ++++++++++++++++++++++++++++++++
 include/linux/mmc/card.h |    3 ++-
 2 files changed, 34 insertions(+), 1 deletions(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index fb99ccf..4c4c9a9 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -165,6 +165,31 @@ static int sdio_enable_wide(struct mmc_card *card)
 }
 
 /*
+ * Disconnect the pull-up resistor on CD/DAT[3] if requested by the card.
+ * If card detection is not needed, this can save some power.
+ */
+static int sdio_disable_cd(struct mmc_card *card)
+{
+       int ret;
+       u8 ctrl;
+
+       if (!card->cccr.disable_cd)
+               return 0;
+
+       ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
+       if (ret)
+               return ret;
+
+       ctrl |= SDIO_BUS_CD_DISABLE;
+
+       ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
+       if (ret)
+               return ret;
+
+       return 0;
+}
+
+/*
  * Test if the card supports high-speed mode and, if so, switch to it.
  */
 static int sdio_enable_hs(struct mmc_card *card)
@@ -392,6 +417,13 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
                goto remove;
 
        /*
+        * Disconnect card detection pull-up resistor (if requested by card).
+        */
+       err = sdio_disable_cd(card);
+       if (err)
+               goto remove;
+
+       /*
         * Initialize (but don't add) all present functions.
         */
        for (i = 0;i < funcs;i++) {
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 403aa50..82a8488 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -62,7 +62,8 @@ struct sdio_cccr {
                                low_speed:1,
                                wide_bus:1,
                                high_power:1,
-                               high_speed:1;
+                               high_speed:1,
+                               disable_cd:1;
 };
 
 struct sdio_cis {
-- 
1.5.4.3



--
To unsubscribe from this list: send the line "unsubscribe linux-embedded" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to