Enable USB on TI DM365
Signed-off-by: Constantine Shulyupin <co...@makelinux.com>
---
arch/arm/mach-davinci/Makefile | 3 +-
arch/arm/mach-davinci/include/mach/usb.h | 2 +-
arch/arm/mach-davinci/usb.c | 32 ++++++++++++++++++++++++++---
drivers/usb/musb/davinci.c | 13 ++++++++++++
drivers/usb/musb/davinci.h | 1 +
5 files changed, 45 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 0b87a1c..52961a8 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
# Common objects
obj-y := time.o clock.o serial.o io.o psc.o \
- gpio.o dma.o usb.o common.o sram.o aemif.o
+ gpio.o dma.o common.o sram.o aemif.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
@@ -40,3 +40,4 @@ obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_SUSPEND) += pm.o sleep.o
+obj-$(CONFIG_USB_MUSB_DAVINCI) += usb.o
diff --git a/arch/arm/mach-davinci/include/mach/usb.h
b/arch/arm/mach-davinci/include/mach/usb.h
index e0bc4ab..863c27f 100644
--- a/arch/arm/mach-davinci/include/mach/usb.h
+++ b/arch/arm/mach-davinci/include/mach/usb.h
@@ -54,6 +54,6 @@ struct da8xx_ohci_root_hub {
u8 potpgt;
};
-void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
+int davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
#endif /* ifndef __ASM_ARCH_USB_H */
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 23d2b6d..8b12206 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -4,19 +4,22 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-
#include <linux/usb/musb.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/usb.h>
+#include <mach/mux.h>
+#include <linux/gpio.h>
#define DAVINCI_USB_OTG_BASE 0x01c64000
#define DA8XX_USB0_BASE 0x01e00000
#define DA8XX_USB1_BASE 0x01e25000
+static int retval;
+
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = {
{ "ep1_tx", 8, },
@@ -87,7 +90,7 @@ static struct platform_device usb_dev = {
.num_resources = ARRAY_SIZE(usb_resources),
};
-void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
+int __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
{
usb_data.power = mA > 510 ? 255 : mA / 2;
usb_data.potpgt = (potpgt_ms + 1) / 2;
@@ -99,7 +102,8 @@ void __init davinci_setup_usb(unsigned mA, unsigned
potpgt_ms)
} else /* other devices don't have dedicated CPPI IRQ */
usb_dev.num_resources = 2;
- platform_device_register(&usb_dev);
+ retval = platform_device_register(&usb_dev);
+ return retval;
}
#ifdef CONFIG_ARCH_DAVINCI_DA8XX
@@ -132,7 +136,7 @@ int __init da8xx_register_usb20(unsigned mA,
unsigned potpgt)
#else
-void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
+int __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
{
}
@@ -178,3 +182,23 @@ int __init da8xx_register_usb11(struct
da8xx_ohci_root_hub *pdata)
return platform_device_register(&da8xx_usb11_device);
}
#endif /* CONFIG_DAVINCI_DA8XX */
+
+#ifdef CONFIG_MACH_DAVINCI_DM365_EVM
+int __init dm365evm_usb_configure(void)
+{
+ davinci_cfg_reg(DM365_GPIO33);
+ gpio_request(33, "usb");
+ gpio_direction_output(33, 1);
+ retval = davinci_setup_usb(500, 8);
+ return retval;
+}
+subsys_initcall(dm365evm_usb_configure);
+
+static void __exit dm365evm_usb_exit(void)
+{
+ platform_device_unregister(&usb_dev);
+}
+module_exit(dm365evm_usb_exit);
+
+#endif
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 2a2adf6..0147f5c 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -72,6 +72,16 @@ static inline void phy_on(void)
/* power everything up; start the on-chip PHY and its PLL */
phy_ctrl &= ~(USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN);
phy_ctrl |= USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON;
+
+ if (cpu_is_davinci_dm365()) {
+ /*
+ * DM365 PHYCLKFREQ field [15:12] is set to 2
+ * to get clock from 24MHz crystal
+ */
+ phy_ctrl |= USBPHY_CLKFREQ_24MHZ;
+ /*phy_ctrl &= ~USBPHY_PHYPDWN;*/
+ }
+
__raw_writel(phy_ctrl, USB_PHY_CTRL);
/* wait for PLL to lock before proceeding */
@@ -193,6 +203,9 @@ static void davinci_musb_source_power(struct musb
*musb, int is_on, int immediat
else
schedule_work(&evm_vbus_work);
}
+
+ if (cpu_is_davinci_dm365())
+ gpio_set_value(33, is_on);
if (immediate)
vbus_state = is_on;
#endif
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
index 046c844..1bf50e6 100644
--- a/drivers/usb/musb/davinci.h
+++ b/drivers/usb/musb/davinci.h
@@ -17,6 +17,7 @@
/* Integrated highspeed/otg PHY */
#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
#define USBPHY_DATAPOL BIT(11) /* (dm355) switch D+/D- */
+#define USBPHY_CLKFREQ_24MHZ BIT(13)
#define USBPHY_PHYCLKGD BIT(8)
#define USBPHY_SESNDEN BIT(7) /* v(sess_end) comparator */
#define USBPHY_VBDTCTEN BIT(6) /* v(bus) comparator */
--
1.7.0.4
--
Constantine Shulyupin
http://www.MakeLinux.com/
Embedded Linux Systems,
Device Drivers, TI DaVinci
--
To unsubscribe from this list: send the line "unsubscribe linux-embedded" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
