Dave,
Trolltech makes a very popular IDE called QT embedded.
This is used by Ericsson and several other in their
latest products. Check out http://www.trolltech.com/
Marius Hauki
Dave McLaughlin wrote:
>
> Hi All,
>
> I am new to Linux as a programmer but I have dabbled with it in the past. I
> am however familiar with Windows programming using Borland C++ Builder.
>
> I have a small home project for a digital dash for my modified car.
>
> I have a 6.5" TFT display hooked up to a AMD 586 single board computer and
> I am looking for a good graphical programming setup for this.
>
> I am currently dabbling with an evaluation copy of Windows CE but the full
> cost of this is really not ideal for me.
>
> Is there a low cost or free embedded Linux setup I can get running on this
> system. The specs are below. Ideally a decent graphical programming
> environment would be ideal as I am not used to command line compilers these
> days. Even the embedded microcontroller sutff I do has a proper IDE etc.
> Again, I would like a Windows base cross development environment for this.
> Most system I have found on the net are well out of my price range.
>
> If I have to install and run a Linux system, what is the easiest to get
> running with a programmers IDE etc.
>
> AMD 586 133 processor
> 32Mb RAM
> 21.4Mb flash drive (on the IDE port)
> 2 serial ports
> 1 off PCI ethernet
> NEC 6.5" TFT display (NL6448BC20-08)
>
> Sorry for all the questions but as I said, I am a newbie to Linux and Linux
> embedded
>
> Best regards
> Dave...
>
> --------------------------------------------
> www.v8carlton.co.uk
> V8 Chevy Power
> [EMAIL PROTECTED]
--
To unsubscribe from this list, send a message to [EMAIL PROTECTED]
with the command "unsubscribe linux-embedded" in the message body.
For more information, see <http://waste.org/mail/linux-embedded>.
