On 9/24/25 15:43, Yunji Kang wrote: > In f2fs_precache_extents(), For large files, It requires reading many > node blocks. Instead of reading each node block with synchronous I/O, > this patch applies readahead so that node blocks can be fetched in > advance. > > It reduces the overhead of repeated sync reads and improves efficiency > when precaching extents of large files. > > I created a file with the same largest extent and executed the test. > For this experiment, I set the file's largest extent with an offset of 0 > and a size of 1GB. I configured the remaining area with 100MB extents. > > 5GB test file: > dd if=/dev/urandom of=test1 bs=1m count=5120 > cp test1 test2 > fsync test1 > dd if=test1 of=test2 bs=1m skip=1024 seek=1024 count=100 conv=notrunc > dd if=test1 of=test2 bs=1m skip=1224 seek=1224 count=100 conv=notrunc > ... > dd if=test1 of=test2 bs=1m skip=5024 seek=5024 count=100 conv=notrunc > reboot > > I also created 10GB and 20GB files with large extents using the same > method. > > ioctl(F2FS_IOC_PRECACHE_EXTENTS) test results are as follows: > +-----------+---------+---------+-----------+ > | File size | Before | After | Reduction | > +-----------+---------+---------+-----------+ > | 5GB | 101.8ms | 37.0ms | 72.1% | > | 10GB | 222.9ms | 56.0ms | 74.9% | > | 20GB | 446.2ms | 116.4ms | 73.9% | > +-----------+---------+---------+-----------+ > Tested on a 256GB mobile device with an SM8750 chipset. > > Reviewed-by: Sungjong Seo <[email protected]> > Reviewed-by: Sunmin Jeong <[email protected]> > Signed-off-by: Yunji Kang <[email protected]>
Reviewed-by: Chao Yu <[email protected]> Thanks, _______________________________________________ Linux-f2fs-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
