From: Yongpeng Yang <[email protected]>
When the block device reports max_open_zones == 0, sbi->max_open_zones
is initialized to UINT_MAX. In such cases, F2FS can still be mounted
successfully (as tested under qemu).
However, for SSDs, a device reporting max_open_zones == 0 should not be
mountable, while for SMR HDDs this is acceptable.
Fix this issue by handling max_open_zones == 0 properly:
- Disallow mounting on SSDs when max_open_zones == 0.
- For SMR HDDs, set max_open_zones to the total number of zones.
- Remove redundant zoned device checks.
- Add a sysfs entry to expose max_open_zones.
Fixes: 0f9b12142be1af("f2fs: fix zoned block device information initialization")
Signed-off-by: Yongpeng Yang <[email protected]>
---
fs/f2fs/super.c | 36 +++++++++++++++++++++---------------
fs/f2fs/sysfs.c | 2 ++
2 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index c055032593b7..7349d9cd901b 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -4353,21 +4353,6 @@ static int init_blkz_info(struct f2fs_sb_info *sbi, int
devi)
unsigned int max_open_zones;
int ret;
- if (!f2fs_sb_has_blkzoned(sbi))
- return 0;
-
- if (bdev_is_zoned(FDEV(devi).bdev)) {
- max_open_zones = bdev_max_open_zones(bdev);
- if (max_open_zones && (max_open_zones < sbi->max_open_zones))
- sbi->max_open_zones = max_open_zones;
- if (sbi->max_open_zones < F2FS_OPTION(sbi).active_logs) {
- f2fs_err(sbi,
- "zoned: max open zones %u is too small, need at
least %u open zones",
- sbi->max_open_zones,
F2FS_OPTION(sbi).active_logs);
- return -EINVAL;
- }
- }
-
zone_sectors = bdev_zone_sectors(bdev);
if (sbi->blocks_per_blkz && sbi->blocks_per_blkz !=
SECTOR_TO_BLOCK(zone_sectors))
@@ -4378,6 +4363,27 @@ static int init_blkz_info(struct f2fs_sb_info *sbi, int
devi)
if (nr_sectors & (zone_sectors - 1))
FDEV(devi).nr_blkz++;
+ max_open_zones = bdev_max_open_zones(bdev);
+ if (!max_open_zones) {
+ /*
+ * SSDs require max_open_zones > 0 to be mountable.
+ * For HDDs, if max_open_zones is reported as 0, it doesn't
matter,
+ * set it to FDEV(devi).nr_blkz.
+ */
+ if (bdev_nonrot(bdev)) {
+ f2fs_err(sbi, "zoned: SSD device %s without open
zones", FDEV(devi).path);
+ return -EINVAL;
+ }
+ max_open_zones = FDEV(devi).nr_blkz;
+ }
+ sbi->max_open_zones = min_t(unsigned int, max_open_zones,
sbi->max_open_zones);
+ if (sbi->max_open_zones < F2FS_OPTION(sbi).active_logs) {
+ f2fs_err(sbi,
+ "zoned: max open zones %u is too small, need at least
%u open zones",
+ sbi->max_open_zones, F2FS_OPTION(sbi).active_logs);
+ return -EINVAL;
+ }
+
FDEV(devi).blkz_seq = f2fs_kvzalloc(sbi,
BITS_TO_LONGS(FDEV(devi).nr_blkz)
* sizeof(unsigned long),
diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c
index 98d2cb60e806..d3d268c707a9 100644
--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -1210,6 +1210,7 @@ F2FS_SBI_GENERAL_RW_ATTR(last_age_weight);
F2FS_SBI_GENERAL_RW_ATTR(max_read_extent_count);
#ifdef CONFIG_BLK_DEV_ZONED
F2FS_SBI_GENERAL_RO_ATTR(unusable_blocks_per_blkz);
+F2FS_SBI_GENERAL_RO_ATTR(max_open_zones);
F2FS_SBI_GENERAL_RW_ATTR(blkzone_alloc_policy);
#endif
F2FS_SBI_GENERAL_RW_ATTR(carve_out);
@@ -1384,6 +1385,7 @@ static struct attribute *f2fs_attrs[] = {
#endif
#ifdef CONFIG_BLK_DEV_ZONED
ATTR_LIST(unusable_blocks_per_blkz),
+ ATTR_LIST(max_open_zones),
ATTR_LIST(blkzone_alloc_policy),
#endif
#ifdef CONFIG_F2FS_FS_COMPRESSION
--
2.43.0
_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
