Jaegeuk,
On 6/15/16 03:45, Jaegeuk Kim wrote:
> If mkfs.f2fs gives a feature flag for host-managed SMR, we can set mode=lfs
> by default.
>
> Signed-off-by: Jaegeuk Kim <jaeg...@kernel.org>
> ---
> fs/f2fs/f2fs.h | 21 +++++++++++++++++++++
> fs/f2fs/super.c | 14 ++++++++------
> 2 files changed, 29 insertions(+), 6 deletions(-)
>
> diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
> index 32be19e..1a19c02 100644
> --- a/fs/f2fs/f2fs.h
> +++ b/fs/f2fs/f2fs.h
> @@ -133,6 +133,7 @@ struct f2fs_mount_info {
> };
>
> #define F2FS_FEATURE_ENCRYPT 0x0001
> +#define F2FS_FEATURE_HMSMR 0x0002
>
> #define F2FS_HAS_FEATURE(sb, mask) \
> ((F2FS_SB(sb)->raw_super->feature & cpu_to_le32(mask)) != 0)
> @@ -2354,6 +2355,26 @@ static inline int f2fs_sb_has_crypto(struct
> super_block *sb)
> return F2FS_HAS_FEATURE(sb, F2FS_FEATURE_ENCRYPT);
> }
>
> +static inline int f2fs_sb_mounted_hmsmr(struct super_block *sb)
> +{
> + return F2FS_HAS_FEATURE(sb, F2FS_FEATURE_HMSMR);
> +}
> +
> +static inline void set_opt_mode(struct f2fs_sb_info *sbi, unsigned int mt)
> +{
> + clear_opt(sbi, ADAPTIVE);
> + clear_opt(sbi, LFS);
> +
> + switch (mt) {
> + case F2FS_MOUNT_ADAPTIVE:
> + set_opt(sbi, ADAPTIVE);
> + break;
> + case F2FS_MOUNT_LFS:
> + set_opt(sbi, LFS);
> + break;
> + }
> +}
> +
> static inline bool f2fs_may_encrypt(struct inode *inode)
> {
> #ifdef CONFIG_F2FS_FS_ENCRYPTION
> diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> index edc736d..71b6066 100644
> --- a/fs/f2fs/super.c
> +++ b/fs/f2fs/super.c
> @@ -515,12 +515,10 @@ static int parse_options(struct super_block *sb, char
> *options)
> return -ENOMEM;
> if (strlen(name) == 8 &&
> !strncmp(name, "adaptive", 8)) {
> - set_opt(sbi, ADAPTIVE);
> - clear_opt(sbi, LFS);
> + set_opt_mode(sbi, F2FS_MOUNT_ADAPTIVE);
> } else if (strlen(name) == 3 &&
> !strncmp(name, "lfs", 3)) {
> - clear_opt(sbi, ADAPTIVE);
> - set_opt(sbi, LFS);
> + set_opt_mode(sbi, F2FS_MOUNT_LFS);
> } else {
> kfree(name);
> return -EINVAL;
> @@ -980,7 +978,10 @@ static void default_options(struct f2fs_sb_info *sbi)
> set_opt(sbi, EXTENT_CACHE);
> sbi->sb->s_flags |= MS_LAZYTIME;
> set_opt(sbi, FLUSH_MERGE);
> - set_opt(sbi, ADAPTIVE);
> + if (f2fs_sb_mounted_hmsmr(sbi->sb))
> + set_opt_mode(sbi, F2FS_MOUNT_LFS);
> + else
> + set_opt_mode(sbi, F2FS_MOUNT_ADAPTIVE);
Strictly speaking, host-aware drives would not require the LFS mode
as any zone of the disk can be randomly written and so the occasional
in-place updates of the adaptive mode would be OK. However, randomly
writing host-aware drives can lead to a lot of background activity on
the drive side for internal management of the accumulated random writes,
with a potential performance drop over time (this is highly dependent on
the drive FW implementation though).
So I think it would be good to also enable the LFS mode by default for
host-aware devices, unless the user has explicitly specified mount with
adaptive mode (if the user "knows" that the drive FW handles very
efficiently random writes).
So how about also introducing a F2FS_FEATURE_HASMR feature flag to
handle these different cases ?
Also, I think that the DISCARD option must be enabled by default for
HMSMR disks. Otherwise, zones write pointer will never get reset.
The same applies to HASMR devices mounted with the LFS mode.
(In any case, the discard handling does not look like it will always
align to the device zone size, which will fail on a zoned disk (discard
granularity is the zone size). I may be missing something though. Still
checking.)
Best regards.
--
Damien Le Moal, Ph.D.
Sr. Manager, System Software Group, HGST Research,
HGST, a Western Digital company
damien.lem...@hgst.com
(+81) 0466-98-3593 (ext. 513593)
1 kirihara-cho, Fujisawa,
Kanagawa, 252-0888 Japan
www.hgst.com
Western Digital Corporation (and its subsidiaries) E-mail Confidentiality
Notice & Disclaimer:
This e-mail and any files transmitted with it may contain confidential or
legally privileged information of WDC and/or its affiliates, and are intended
solely for the use of the individual or entity to which they are addressed. If
you are not the intended recipient, any disclosure, copying, distribution or
any action taken or omitted to be taken in reliance on it, is prohibited. If
you have received this e-mail in error, please notify the sender immediately
and delete the e-mail in its entirety from your system.
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports. http://pubads.g.doubleclick.net/gampad/clk?id=1444514421&iu=/41014381
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
