On Thu, Oct 04, 2018 at 12:35:01PM +0800, Chao Yu wrote:
> From: Chao Yu <yuch...@huawei.com>
>
> After fsync, filesystem should guarantee inode metadata including
> i_flags being persisted, so even after sudden power-cut, during
> mount, we should recover i_flags fields correctly, in order to not
> loss those meta info.
>
> So adding this testcase to check whether generic filesystem can
> guarantee that.
>
> We only check below attribute modification which most filesystem
> supports:
> - no atime updates (A)
> - secure deletion (s)
> - synchronous updates (S)
> - undeletable (u)
>
> Signed-off-by: Chao Yu <yuch...@huawei.com>
> ---
> tests/generic/507 | 132 ++++++++++++++++++++++++++++++++++++++++++
> tests/generic/507.out | 2 +
> tests/generic/group | 1 +
> 3 files changed, 135 insertions(+)
> create mode 100755 tests/generic/507
> create mode 100644 tests/generic/507.out
>
> diff --git a/tests/generic/507 b/tests/generic/507
> new file mode 100755
> index 00000000..2c718f8d
> --- /dev/null
> +++ b/tests/generic/507
> @@ -0,0 +1,132 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2018 Huawei. All Rights Reserved.
> +#
> +# FS QA Test 507
> +#
> +# This testcase is trying to test recovery flow of generic filesystem, w/
> below
> +# steps, once i_flags changes, after we fsync that file, we can expect that
> +# i_flags can be recovered after sudden power-cuts.
> +# 1. touch testfile;
> +# 1.1 sync (optional)
> +# 2. chattr +[AsSu] testfile
> +# 3. xfs_io -f testfile -c "fsync";
> +# 4. godown;
> +# 5. umount;
> +# 6. mount;
> +# 7. check i_flags
> +# 8. chattr -[AsSu] testfile
> +# 9. xfs_io -f testfile -c "fsync";
> +# 10. godown;
> +# 11. umount;
> +# 12. mount;
> +# 13. check i_flags
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +_supported_fs generic
> +_supported_os Linux
> +
> +_require_test_lsattr
> +_require_command "$CHATTR_PROG" chattr
Need to check if the "$opt" is supported by the filesystem, i.e.
_require_chattr AsSu
Currently xfs doesn't support changing attr 's' and 'u' so test fails.
> +
> +_require_scratch
> +_require_scratch_shutdown
> +
> +_scratch_mkfs >/dev/null 2>&1
> +_require_metadata_journaling $SCRATCH_DEV
> +
> +testfile=$SCRATCH_MNT/testfile
> +opt="AsSu"
> +
> +do_check()
> +{
> + attr=$1
> +
> + _scratch_mount
> +
> + touch $testfile
> +
> + if [ "$2" == "sync" ]; then
> + echo "sync" >> $seqres.full
> + sync
> + fi
> +
> + echo "Test chattr +$1" >> $seqres.full
> +
> + # add attribute
> + chattr +$attr $testfile
$CHATTR_PROG
> +
> + before=`lsattr $testfile`
$LSATTR_PROG (after adding the definition in patch 1).
> +
> + $XFS_IO_PROG -f $testfile -c "fsync" | _filter_xfs_io
> +
> + _scratch_shutdown | tee -a $seqres.full
> + _scratch_cycle_mount
> +
> + after=`lsattr $testfile`
> +
> + # check inode's i_flags
> + if [ "$before" != "$after" ]; then
> + echo "Before: $before"
> + echo "After : $after"
> + fi
> + echo "Before: $before" >> $seqres.full
> + echo "After : $after" >> $seqres.full
> +
> + echo "Test chattr -$1" >> $seqres.full
> +
> + # delete attribute
> + chattr -$attr $testfile
> +
> + before=`lsattr $testfile`
> +
> + $XFS_IO_PROG -f $testfile -c "fsync" | _filter_xfs_io
> +
> + _scratch_shutdown | tee -a $seqres.full
> + _scratch_cycle_mount
> +
> + after=`lsattr $testfile`
> +
> + # check inode's i_flags
> + if [ "$before" != "$after" ]; then
> + echo "Before: $before"
> + echo "After : $after"
> + fi
> + echo "Before: $before" >> $seqres.full
> + echo "After : $after" >> $seqres.full
> +
> + rm $testfile
rm -f $testfile
> + _scratch_unmount
> +}
> +
> +echo "Silence is golden"
> +
> +for i in `seq ${#opt}`; do
> + do_check ${opt:$i-1:1}
> + do_check ${opt:$i-1:1} sync
> +done
I think it'd be easier to read if we do something like:
opts="A s S u"
for i in $opts; do
do_check $i
do_check $i sync
done
Thanks,
Eryu
> +
> +status=0
> +exit
> diff --git a/tests/generic/507.out b/tests/generic/507.out
> new file mode 100644
> index 00000000..3d8672f8
> --- /dev/null
> +++ b/tests/generic/507.out
> @@ -0,0 +1,2 @@
> +QA output created by 507
> +Silence is golden
> diff --git a/tests/generic/group b/tests/generic/group
> index c7d42ff9..e94253dc 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -509,3 +509,4 @@
> 504 auto quick locks
> 505 shutdown auto quick metadata
> 506 shutdown auto quick metadata quota
> +507 shutdown auto quick metadata
> --
> 2.18.0
>
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
