There was a problem that did not subtract the super block area when calculating
the usable segments for a single zoned device with a conventional zone.
This resulted in incorrect the overprovision and reserved area.
<256MiB legacy block + zoned block w/ 32MiB zone size>
Info: Overprovision ratio = 3.570%
Info: Overprovision segments = 656 (GC reserved = 560)
<8 conventional zone + 1016 sequential zone w/ 32MiB zone size>
Info: Overprovision ratio = 3.700%
Info: Overprovision segments = 676 (GC reserved = 578)
This patch addresses the problem by subtracting the super block area when
there is only one zoned device.
Signed-off-by: Yonggil Song <yonggil.s...@samsung.com>
---
lib/libf2fs_zoned.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/lib/libf2fs_zoned.c b/lib/libf2fs_zoned.c
index 89ba5ad73a76..1a0985378789 100644
--- a/lib/libf2fs_zoned.c
+++ b/lib/libf2fs_zoned.c
@@ -555,6 +555,11 @@ uint32_t f2fs_get_usable_segments(struct f2fs_super_block
*sb)
}
usable_segs -= (get_sb(main_blkaddr) - get_sb(segment0_blkaddr)) >>
get_sb(log_blocks_per_seg);
+
+ /* single zoned device needs to remove a super block area */
+ if (c.ndevs == 1 && c.devices[0].zoned_model == F2FS_ZONED_HM)
+ usable_segs -= (get_sb(segment0_blkaddr) >>
get_sb(log_blocks_per_seg));
+
return usable_segs;
#endif
return get_sb(segment_count_main);
--
2.43.0
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
