>>>>> On Wed, 04 Sep 2013 09:29:16 +0200, Karl Koch <cypher_h...@gmx.net> said:

    > Good Morning, is the same Problem with 'C':
No, it not the same problem.

    > (CMD) parted -s /dev/sda unit TiB print 1> /tmp/0MMJ46TdOt 2> 
/tmp/ig5grBuJds
    > Executing: parted -s /dev/sda unit TiB print
    > (STDOUT) Model: HP LOGICAL VOLUME (scsi)
    > (STDOUT) Disk /dev/sda: 0.27TiB
    > (STDOUT) Sector size (logical/physical): 512B/512B
    > (STDOUT) Partition Table: msdos
    > (STDOUT) 
    > (STDOUT) Number  Start    End      Size     Type      File system     
Flags
    > (STDOUT)  1      0.00TiB  0.02TiB  0.02TiB  primary   ext4
    > (STDOUT)  2      0.02TiB  0.04TiB  0.02TiB  primary   linux-swap(v1)
    > (STDOUT)  3      0.04TiB  0.27TiB  0.23TiB  extended                  lba
    > (STDOUT)  5      0.04TiB  0.27TiB  0.23TiB  logical   ext4
Fine, the comma disappeared and now you have the dot in the output.

There's another problem with setup-storage, but the error message
" FAI::convert_unit('42,75TiB') called at " is now gone.
-- 
regards Thomas

Reply via email to