[EMAIL PROTECTED] wrote: > Hi, I had the following question regarding FAI - something which > I havent been able to understand from the documentation: Currently I'm writing a complete new documentation. > Where and how do you specify which hosts are in which classes? All classes are defined by scripts and files in /usr/local/share/fai/class/ > for example if A and C have the same network card and B and D have > to have a certain package and E and F have to have a certain partition > structure but all ABCDEF have the same base system, its still not > clear to me how to do this with classes. additional examples are in /usr/share/doc/fai/examples/class. for network card specific classes you can use S05network_card.pl Following script will add class X1 to host B and D and add class PARTITION1 to host E and F. Then create a file .../fai/disk_config/PARTITION1 , which will automatic used by host E and F. case $HOSTNAME in B|D) echo X1 ;; E|F) echo PARTITION1 ;; esac For the base system, which is used by all hosts, you can use the class ANY. Hope this helps -- Thomas ---------------------------------------------------------------------- Thomas Lange Institut fuer Informatik mailto:[EMAIL PROTECTED] Universitaet zu Koeln Pohligstr. 1 Telefon: +49 221 470 5303 50969 Koeln Fax : +49 221 470 5317 ----------------------------------------------------------------------