Hi @ll,
hat mal einer zwei Tips f�r mich?!
erstmal gibt es bei einem Aufruf von fai-setup immer die unten
angegebene Ausgabe die leider nicht konform mit meiner Anleitung geht :(
.... warum habe ich dependecy Probleme?
.... und warum bleibt das Script nach vielen Leerzeilen stehen ohne ein
OK etc.?
Und zweites Problem, wenn ich einfach annehme alles hat geklappt
(*immerpositivdenken*) und einen Client installieren will, werden die
Scripte etc. im Verzeichnis class zwar ausgef�hrt, aber eine
Festplattenpartitionierung (n�chstes Verzeichnis) nimmt er leider nicht
vor ... genauer gesagt kann ich �berhaupt nichts bemerken was er noch
tun k�nnte, er sollte doch nun einfach loslegen (Partitionsdatei habe
ich angepasst) oder muss ich noch irgendwo nen Kn�pfchen dr�cken, bzw.
hab ich etwas vergessen?
gruss
stefan
P.S.
Die Ausgaben:
Ausgabe fai-setup: ->
Account $LOGUSER=fai already exists.
Make sure, that all install clients can
log into this account without a password.
/home/fai/.ssh/authorized_keys created.
User account fai set up.
Creating FAI nfsroot can take a long time and will
need more than 150MB disk space in /usr/lib/fai/nfsroot.
/usr/lib/fai/nfsroot already exists. Removing /usr/lib/fai/nfsroot
dpkg: base-passwd: dependency problems, but configuring anyway as you
request:
base-passwd depends on libc6 (>= 2.2.4-4); however:
Package libc6 is not installed.
dpkg: base-files: dependency problems, but configuring anyway as you
request:
base-files depends on awk; however:
Package awk is not installed.
dpkg: regarding .../archives/dpkg_1.9.21_i386.deb containing dpkg,
pre-dependency problem:
dpkg pre-depends on libc6 (>= 2.2.4-4)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../archives/dpkg_1.9.21_i386.deb containing dpkg,
pre-dependency problem:
dpkg pre-depends on libncurses5 (>= 5.2.20020112a-1)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../archives/dpkg_1.9.21_i386.deb containing dpkg,
pre-dependency problem:
dpkg pre-depends on libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810)
dpkg: warning - ignoring pre-dependency problem !
dpkg: dpkg: dependency problems, but configuring anyway as you request:
dpkg depends on libc6 (>= 2.2.4-4); however:
Package libc6 is not installed.
dpkg depends on libncurses5 (>= 5.2.20020112a-1); however:
Package libncurses5 is not installed.
dpkg depends on libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810); however:
Package libstdc++2.10-glibc2.2 is not installed.
Package `sysvinit' is not installed and no info is available.
Use dpkg --info (= dpkg-deb --info) to examine archive files,
and dpkg --contents (= dpkg-deb --contents) to list their contents.
dpkg: debconf: dependency problems, but configuring anyway as you
request:
debconf depends on fileutils (>= 4.0-5); however:
Package fileutils is not installed.
dpkg: regarding .../bash_2.05a-11_i386.deb containing bash,
pre-dependency problem:
bash pre-depends on libncurses5 (>= 5.2.20020112a-1)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../archives/dpkg_1.9.21_i386.deb containing dpkg,
pre-dependency problem:
dpkg pre-depends on libncurses5 (>= 5.2.20020112a-1)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../archives/dpkg_1.9.21_i386.deb containing dpkg,
pre-dependency problem:
dpkg pre-depends on libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../login_20000902-12_i386.deb containing login,
pre-dependency problem:
login pre-depends on libpam0g (>= 0.72-1)
libpam0g is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../ncurses-bin_5.2.20020112a-7_i386.deb containing
ncurses-bin, pre-dependency problem:
ncurses-bin pre-depends on libncurses5 (>= 5.2.20020112a-1)
libncurses5 is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../shellutils_2.0.11-11_i386.deb containing shellutils,
pre-dependency problem:
shellutils pre-depends on login | hurd
login is unpacked, but has never been configured.
hurd is not installed.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../util-linux_2.11n-4_i386.deb containing util-linux,
pre-dependency problem:
util-linux pre-depends on libncurses5 (>= 5.2.20020112a-1)
libncurses5 is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../util-linux_2.11n-4_i386.deb containing util-linux,
pre-dependency problem:
util-linux pre-depends on slang1 (>> 1.3.0-0)
slang1 is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
init: timeout opening/writing control channel /dev/initctl
init: timeout opening/writing control channel /dev/initctl
Looking for keymap to install:
NONE
Looking for keymap to install:
NONE
/tmp/fai/rcS.log -->
-----------------------------------------------------
FAI 2.3.4, 16 May 2002
Fully Automatic Installation for Debian GNU/Linux
Copyright (c) 1999-2002, Thomas Lange
[EMAIL PROTECTED]
-----------------------------------------------------
Calling task_confdir
Kernel parameters:ip=dhcp BOOT_IMAGE=installkernel
Defining variable: ip=dhcp
Defining variable: BOOT_IMAGE=installkernel
/fai mounted from FAI:/usr/local/share/fai
Calling task_setup
FAI_FLAGS: verbose=1
FAI_FLAGS: createvt=1
FAI_FLAGS: sshd=1
Press ctrl-c to interrupt FAI and to get a shell
Calling task_defclass
Defining classes
ls: S[0-9]*.source: No such file or directory
Executing S01alias.sh
Executing S07disk.pl
Executing S24nis.sh
Executing S90partitions.pl
Calling task_defvar
Executing DEFAULT.var
Calling task_action
FAI_ACTION: sysinfo
Showing system information.
Calling task_sysinfo
The defined classes are:
DEFAULT I386 LINUX NONIS what LAST
The classes are also saved in /tmp/fai/FAI_CLASSES
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev
03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev
03)
00:0a.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev
05)
00:14.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
00:14.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01)
00:14.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01)
00:14.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP
1X/2X (rev 5c)
Device DMA IRQ I/O Ports
------------------------------------------------
ATI 1000-10ff
cascade 4 2
dma 0080-008f
dma1 0000-001f
dma2 00c0-00df
eepro100 2000-201f
eth0 11
fpu 00f0-00ff
ide0 14 01f0-01f7 03f6-03f6 2040-2047
ide1 15 0170-0177 0376-0376 2048-204f
Intel 2000-201f 2020-203f 2040-204f f800-f83f
fc00-fc1f
keyboard 1 0060-006f
PCI 0cf8-0cff 1000-1fff
pic1 0020-003f
pic2 00a0-00bf
rtc 8 0070-007f
serial 02f8-02ff 03f8-03ff
timer 0 0040-005f
vga+ 03c0-03df
Ethernet cards found: eth0 eth0
Ethernet cards running: eth0
eth0 Link encap:Ethernet HWaddr 00:50:C3:90:8B:87
inet addr:192.168.100.106 Bcast:192.168.100.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4891 errors:0 dropped:0 overruns:0 frame:2
TX packets:2026 errors:0 dropped:0 overruns:0 carrier:0
collisions:20 txqueuelen:100
RX bytes:6263864 (5.9 MiB) TX bytes:303327 (296.2 KiB)
Interrupt:11 Base address:0xd000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1092 (1.0 KiB) TX bytes:1092 (1.0 KiB)
xserver for graphic card: ati
Intel Corporation 82557 [Ethernet Pro 100]
Unknown CD-224E
Linux IDE-SCSI emulation layer
ATI Technologies, Inc. 3D Rage Pro AGP [264GT Pro GB]
eepro100
ide-scsi
Can't open file `/proc/parport/0/autoprobe' for reading!
detect 0.9.72 (c)2000 MandrakeSoft
Detection in progress, please wait ...
#
# This report has been generated by detect 0.9.72
#
CPU:GenuineIntel:Pentium III
(Katmai):497:[HAS_FPU:HAS_MMX]:992.87:(none)
MEMORY:125592:109184:0:8:8328:0:0
BRIDGE:PCI:Intel Corporation:440BX/ZX - 82443BX/ZX Host bridge:ignore
BRIDGE:PCI:Intel Corporation:440BX/ZX - 82443BX/ZX AGP bridge:ignore
BRIDGE:PCI:Intel Corporation:82371AB PIIX4 ISA:unknown
IDE:PCI:Intel Corporation:82371AB PIIX4 IDE:unknown
USB:PCI:Intel Corporation:82371AB PIIX4 USB:usb-uhci
DISK:ATAPI/IDE:Unknown:WDC WD100AA:/dev/hda:19535040:240:63:1292
FLOPPY:Floppy Drive Controller:Unknown:1.44MB 3.5":/dev/fd0
CDROM:ATAPI/IDE:Unknown:CD-224E:/dev/hdc
VIDEO:PCI:ATI Technologies Inc:Mach64 3D Rage Pro AGP
1X/2X:[Card:ATI]:256:(null):(null)
ETHERNET:PCI:Intel Corporation:82557 [Ethernet Pro 100]:eepro100
MOUSE:PS/2:Unknown:Unknown:/dev/psaux
PARALLEL:/dev/lp0:LPT0
SERIAL:/dev/ttyS0:COM0
SERIAL:/dev/ttyS1:COM1
OTHER:80867113:PCI:Intel Corporation:82371AB PIIX4 ACPI:ignore
FREE_IRQS:3:4:5:7:10:12:13:
FREE_DMAS:0:1:3:5:6:7:Attached devices: none
major minor #blocks name
3 0 9770544 hda
/dev/hda:
multcount = 16 (on)
I/O support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 1292/240/63, sectors = 19541088, start = 0
Model=WDC WD100AA, FwRev=05.05B05, SerialNo=WD-WMA1C1506827
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs
FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=19541088
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4
AdvancedPM=no WriteCache=enabled
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4
busstate = 1 (on)
9770544
/dev/hda1: empty
/dev/hda2: empty
/dev/hda3: empty
/dev/hda4: empty
/dev/hda5: empty
/dev/hda6: empty
/dev/hda7: empty
/dev/hda8: empty
/dev/hda9: empty
Disk /dev/hda: 240 heads, 63 sectors, 1292 cylinders
Units = sectors of 1 * 512 bytes
Device Boot Start End Blocks Id System
No /etc/fstab found
Loading /usr/share/keymaps/i386/qwertz/de-latin1.kmap.gz
Saving log files remote to fai@ what/sysinfo-20020904_124015
ssh: mkdir -p what/sysinfo-20020904_124015; cd what; rm -f
last-sysinfo; ln -sf sysinfo-20020904_12: Name or service not known
ssh: : Name or service not known
lost connection
Press <RETURN> to reboot or ctrl-c to execute a shell
