Hi, after the jaunty kernel gives the same result as the originally tried 2.6.26, so I think I can mostly exclude that it's a kernel issue.
So, one of our new boxes (Asus board with 2 GPUs on it) boots via PXE, starts the FAI install (3.2.16) and runs through it fine, however, when almost done it tries to run savelog and during that it fails, loses its network interface and stalls for 15-30 minutes. It always fails when trying to transfer the content of dmesg, thus on the FAI server this file is always of size 0 while other files before are transferred fine. This was tested with both rsh and ssh. Also, when I log into the system via ssh and call dmesg interactively, it also kills the network interface and the install then of course stalls as well. Writing dmesg directly into a file and copying it over via scp works, but does not reveal anything strange. http://atlas.atlas.aei.uni-hannover.de/~carsten/installlog.jpg shows a (bad) screen shot of the last lines during the installation. In this state it takes between 15-30 minutes until some time-out kicks in and the machine is rebooted. When switching over to tty4 I do see this weird stuff on the screen: http://atlas.atlas.aei.uni-hannover.de/~carsten/syslog.jpg Anyone with an idea what's happening to this nice and shiny box? Cheers Carsten
