I have one change - the issue with requesting address form 200 range is perhaps connected to the service processor connected to the same physical interface, so it is logical and not an issue. The rest persists.
Lukas 2009/11/19 Thomas Neumann <[email protected]>: > hiya > >> label kernel-2.6.31local-reconfigured-squash >> kernel vmlinuz-2.6.31local-squashfs >> append initrd=initrd.img-2.6.31local ip=dhcp root=/dev/nfs >> nfsroot=/srv/fai/nfsroot boot=live FAI_FLAGS=verbose,sshd,reboot >> FAI_ACTION=install console=tty1 console=ttyS1 > > Could you try removing "console=tty1 console=ttyS1" from the append line? > Or using different values? I don't know how you set up your SUN servers. > It's possible that everything's working fine. The console may be somewhere > unexpected, waiting for input. > > I run into this when installing some Servers under Citrix XenServer. > Depending on the kernel I had to move the console to a different device. > The first clue was, that the system was accessible via ssh, but in the > console window it appeared to hang. (No more output) > > tschüß > thomas > > P.S.: I'd suggest to explicitly add the nfs-server's ip address to > nfsroot=/srv/fai/nfsroot . Shouldn't change anything, except that it's > more obvious that this parameter is an nfs share. > >
