Hi all,
I'm currently troubleshooting why one of our boxes refuses to install correctly
(FAI version
is the one from Lenny, if I've overlooked the bugfix since then, please let me
know).
This controller
03:00.0 RAID bus controller: Adaptec AAC-RAID (rev 09)
Subsystem: Adaptec 5405
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at fac00000 (64-bit, non-prefetchable) [size=2M]
Expansion ROM at fab80000 [disabled] [size=512K]
Capabilities: [98] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s
unlimited, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0
<128ns, L1 unlimited
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [90] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: aacraid
Kernel modules: aacraid
is recognized and the module seems to work, as I can run parted against it and
partition
the device manually.
FAI fails to populate diskinfo properly:
The following steps happen:
egrep ' etherd/e[[:digit:]]+\.[[:digit:]]+\b| i2o/hd.\b| cciss/c.d.\b|
ida/c.d.\b| rd/c.d.\b| hd.\b| sd[a-z]{1,2}\b|/disc\b| vd.\b' /proc/partitions
8 0 1952446464 sda
Good so far, but a stat here shows the problem
titan3:/usr/lib/fai# stat /dev/sda
File: `/dev/sda'
Size: 0 Blocks: 0 IO Block: 4096 block special file
Device: dh/13d Inode: 9237 Links: 1 Device type: 8,0
Access: (0660/brw-rw----) Uid: ( 0/ root) Gid: ( 25/ floppy)
Access: 2009-12-10 08:25:45.373401598 +0000
Modify: 2009-12-10 08:25:45.516631289 +0000
Change: 2009-12-10 08:25:45.516631289 +0000
Why on Earth should the GID be floppy and not disk? Any idea?
Cheers
Carsten
