On 4 Oct 2010, at 4:04 pm, Leen Smit wrote:
> Hello All,
>
> We just got a bunch of new blades in. Lucky for me they are a new generation:
> G6.
> I'm struggling to get these things installed, so I'm hoping some one here has
> experience with these.
>
> The problem lies with the bnx2x network cards, which is not in my current FAI
> config.
> I have tried lots of different options, and I keep running into a wall.
>
> The default 2.6.28 kernel panics on the network card.
> Back-ported version of that panics..
> 2.6.35 boots OK, but can't find the config space.
> I tried using the grml option, but I can't even manage to get it to create
> the nfsroot properly..
> Tried installing debian manually in the idle hope I could create a kernel
> from one node, that resulted in a not booting blade ("illegal opcode" at boot)
> The only thing I could install on these blades so far is Ubuntu Server. Tried
> to install fai on it to use as a base. When booting through fai with that
> kernel the boot just hangs (after USB devices).
>
> Now these blades are not that new, so I'm guessing this must have done
> before, right? Its just debian after all...
>
> So if any one reading this has a BL460c and installed it with fai, can you
> please reply and tell me how you did it with out sacrificing your soul to
> some dark deity?? Please?
Yes, we've done it. You get the same problem with other recent ProLiants -
this is by no means limited to recent BL series machines. You need to install
the bnx2x driver and firmware in the initrd that you PXE boot. You also need
to install the same modules and firmware in the NFS chroot. Nothing else was
required. My procedure for such things is generally:
1) On another machine (preferably one with the same hardware, so you can test
it) install a kernel and the modules that you need. I seem to remember that
the standard lenny kernel works fine, as long as you have the up-to-date bnx2x
driver as well, which you may need to build a package for with module-assistant.
2) Copy the .debs for the kernel, bnx2x and firmare to your FAI nfs root
server, and install them inside the NFS root, by using dpkg's --root option.
3) Copy the kernel and initrd files to the appropriate tftp directory, and
update configs there appropriately.
You'll notice that a lot of this stuff is the sort of thing fai-chboot does -
we don't run fai-chboot here, because we don't want it messing with our PXE
configurations, which are much more widely used than just for FAI, and our
PXE/TFTP server is not on the same machine as the FAI config space and NFS
roots anyway. In fact, our DHCP servers, TFTP server and FAI server are all
separate machines.
Have faith, you can make this work!
Regards,
Tim
--
The Wellcome Trust Sanger Institute is operated by Genome Research
Limited, a charity registered in England with number 1021457 and a
company registered in England with number 2742969, whose registered
office is 215 Euston Road, London, NW1 2BE.
