Hi, I’m using FAI trunk as of today morning and have problems with cryptsetup. Apparently, it doesn’t recognise that I already had a /boot filesystem set up but only at the fstab creation phase. (Furthermore, how do I use disk1 partition 2,3,4 instead of hardcoding /dev/sda – which may very well change?)
Configuration and debugging output attached. A bit of introduction: we (tarent GmbH) _may_, if it proves usable, use FAI to set up our next generation employee work- stations (desktop, laptop) and I’m working on that, got a crash course today and will attend an intensive course with Thomas later (we think). Thanks in advance, //mirabilos -- tarent Gesellschaft für Softwareentwicklung und IT-Beratung mbH Geschäftsführer: Boris Esser, Elmar Geese HRB AG Bonn 5168 - USt-ID (VAT): DE122264941 Heilsbachstraße 24, 53123 Bonn, Telefon: +49 228 52675-93 Thiemannstraße 36 a, 12059 Berlin, Telefon: +49 30 5682943-30 Internet: http://www.tarent.de/ • Telefax: +49 228 52675-25
#disk_config disk1 disklabel:msdos bootable:1 fstabkey:uuid disk_config /dev/sda disklabel:msdos bootable:1 fstabkey:uuid primary /boot 256 ext2 defaults,errors=remount-ro createopts="-L boot -m 0" tuneopts="-c 0 -i 0" primary - 1024-2048 - - primary - 8192-16384 - - primary - 1024- - - disk_config tmpfs tmpfs /tmp 1024 defaults disk_config cryptsetup swap swap /dev/sda2 swap defaults luks / /dev/sda3 ext3 defaults createopts="-L root -m 3" tuneopts="-c 0 -i 0" luks /home /dev/sda4 ext3 defaults createopts="-L home -m 1" tuneopts="-c 0 -i 0"
screenlog.0.gz
Description: Binary data
