Hi, it seems the bug reported by Darshaka Pathirana (third issue in http://www.mail-archive.com/[email protected]/msg03513.html) has not been fixed in 3.4.5. My system fails with the same error. Here the last lines from fai.log:
[...] Executing: pvcreate /dev/md1 Command had non-zero exit code Error in task partition. Traceback: task_error task_partition task task_install task task_action task main FATAL ERROR. Installation stopped. After executing "pvremove -ff -y /dev/md1" everything works fine. Regards Martin -- Dipl. Phys. Martin Konrad Technische Universität Darmstadt Institut für Kernphysik Schlossgartenstr. 9 64289 Darmstadt Tel: +49-6151-16-5121 Fax: +49-6151-16-4321
disk_config disk1 disklabel:msdos bootable:1 primary - 500 - - primary - 0-2G - - disk_config disk2 disklabel:msdos bootable:1 primary - 500 - - primary - 0-2G - - disk_config disk3 disklabel:msdos bootable:1 primary - 500 - - primary - 0-2G - - disk_config raid raid1 /boot disk1.1,disk2.1,disk3.1 ext2 rw,errors=remount-ro raid5 - disk1.2,disk2.2,disk3.2 - - disk_config lvm vg main md1 main-root / 3G- ext3 rw,errors=remount-ro main-var /var 500M ext3 rw,errors=remount-ro main-home /home 100M ext3 rw,errors=remount-ro main-tmp /tmp 100M ext3 rw main-swap swap 100M swap rw
