hi, I want to install several SPARC machines, X86 and LXC Linux container from a Squeeze X86 box. I'm able to install Squeeze via OpenBoot and it works with the netboot (DHCP/TFTP/NFS) Image for SPARC. Under SPARC (Sunfire v245) I installed the FAI-Quickstart, copied /etc/fai to /etc/fai-sparc, changed several pathes inside the config and called "make-fai-nfsroot -v -C /etc/fai-sparc" and copied all files (/etc/fai-sparc + /srv/fai-sparc) to my X86 Squeeze box. But now I hang, because the kernel doesn't find any "init", after the NFS mount, what's right. I can't use the pxelinux.0 file, because it isn't SPARC executable, so I use my own monolith Kernel (which I use for a NFS based rescue system). So, I don't know, what I have to do now. My sources are:
http://fai-project.org/fai-guide.html#_anchor_id_sparc_xreflabel_sparc_fai_on_sun_sparc_hardware_running_linux and google (a lot of). -------------- template ----------------- [...] [ 769.896659] tg3 0000:09:04.0: eth0: dma_rwctrl[76148000] dma_mask[32-bit] [ 769.992267] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 770.078517] ehci_hcd 0000:05:1c.3: EHCI Host Controller [ 770.147807] ehci_hcd 0000:05:1c.3: new USB bus registered, assigned bus number 1 [ 770.245477] ehci_hcd 0000:05:1c.3: debug port 1 [ 107.568137] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.5 [ 107.940694] IP-Config: Complete: [ 107.983143] device=eth3, addr=192.168.1.5, mask=255.255.255.0, gw=192.168.1.1, [ 108.080626] host=template.rbg.foobar, domain=rbg.foobar, nis-domain=(none), [ 108.223866] bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath=/srv/fai-sparc/nfsroot [ 108.343375] md: Waiting for all devices to be available before autodetect [ 108.432825] md: If you don't use raid, use raid=noautodetect [ 108.507781] md: Autodetecting RAID arrays. [ 108.562000] md: invalid raid superblock magic on sda4 [ 108.628545] md: sda4 does not have a valid v0.90 superblock, not importing! [ 108.732429] md: invalid raid superblock magic on sdb4 [ 108.798953] md: sdb4 does not have a valid v0.90 superblock, not importing! [ 108.890621] md: Scanned 2 and added 0 devices. [ 108.949050] md: autorun ... [ 108.985714] md: ... autorun DONE. [ 109.109987] VFS: Mounted root (nfs filesystem) readonly on device 0:14. [ 109.198293] Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 109.362204] Call Trace: [ 109.394368] [0000000000426b94] init_post+0xb0/0xbc [ 109.458537] [0000000000bd63a8] kernel_init+0x16c/0x17c [ 109.527279] [000000000042ab54] kernel_thread+0x30/0x48 [ 109.596034] [00000000009afa3c] rest_init+0x18/0x74 [ 109.660190] Press Stop-A (L1-A) to return to the boot prom ---------------------------------------------------- ------------ Fai server --------------------- [...] Feb 13 16:13:48 iscsihead-s kernel: [279444.170834] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 13 16:13:49 iscsihead-s dhcpd: DHCPDISCOVER from 00:14:4f:b0:5c:37 via eth2 Feb 13 16:13:49 iscsihead-s dhcpd: DHCPOFFER on 192.168.1.5 to 00:14:4f:b0:5c:37 via eth2 Feb 13 16:13:49 iscsihead-s dhcpd: Dynamic and static leases present for 192.168.1.5. Feb 13 16:13:49 iscsihead-s dhcpd: Remove host declaration template or remove 192.168.1.5 Feb 13 16:13:49 iscsihead-s dhcpd: from the dynamic address pool for 192.168.1.0/24 Feb 13 16:13:49 iscsihead-s dhcpd: DHCPREQUEST for 192.168.1.5 (192.168.1.1) from 00:14:4f:b0:5c:37 via eth2 Feb 13 16:13:49 iscsihead-s dhcpd: DHCPACK on 192.168.1.5 to 00:14:4f:b0:5c:37 via eth2 Feb 13 16:13:51 iscsihead-s mountd[9475]: authenticated mount request from 192.168.1.5:860 for /srv/fai-sparc/nfsroot (/srv/fai-sparc/nfsroot) [...] --------------------------------------------- What next? cu denny
signature.asc
Description: Message signed with OpenPGP using GPGMail
