hi, I was able to create a own initrd and kernel, but if i put "boot=live" into the CMD line:
[...] [ 77.044287] Sending DHCP and RARP requests . [ 79.036276] tg3 0000:0c:04.1: eth3: Link is up at 1000 Mbps, full duplex [ 79.126838] tg3 0000:0c:04.1: eth3: Flow control is on for TX and on for RX [ 79.219337] tg3 0000:09:04.0: eth0: Link is up at 1000 Mbps, full duplex [ 79.307565] tg3 0000:09:04.0: eth0: Flow control is on for TX and on for RX [ 81.444262] ., OK [ 82.973979] IP-Config: Got RARP answer from 192.168.1.1, my address is 192.168.1.5 [ 83.228600] IP-Config: Complete: [ 83.271074] device=eth3, addr=192.168.1.5, mask=255.255.255.0, gw=192.168.1.1, [ 83.368550] host=template.rbg.informatik.tu-darmstadt.de, domain=rbg.informatik.tu-darmstadt.de, nis-domain=(none), [ 83.511783] bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath=/srv/fai-sparc/nfsroot [ 83.630980] Warning: unable to open an initial console. [ 83.744448] udev[73]: starting version 164 [ 84.309317] Kernel panic - not syncing: Attempted to kill init! [ 84.387304] Call Trace: [ 84.419388] [000000000045b8f8] do_exit+0xa8/0x6bc [ 84.482394] [000000000045bf7c] do_group_exit+0x70/0xa8 [ 84.551142] [000000000045bfcc] SyS_exit_group+0x18/0x28 [ 84.621044] [0000000000405fd4] linux_sparc_syscall32+0x34/0x40 [ 84.698955] Press Stop-A (L1-A) to return to the boot prom [...] it seems, that I have something missed ... NFSroot option etc. are compiled into the kernel. Without "boot=live" i get the busybox and I can mount the NFS rootfs to something like /mnt ... any suggestions? cu denny
signature.asc
Description: Message signed with OpenPGP using GPGMail
