How about something like
# example of new config file for setup-storage # # <type> <mountpoint> <size> <fs type> <mount options> <misc options> disk_config disk1 align-at:32256B primary - 128 - - logical - 2048 - - logical - 2048 - - logical - 5120 - - logical - 2048 - - logical - 5120 - - logical - 2000- - - disk_config disk2 align-at:32256B primary - 128 - - logical - 2048 - - logical - 2048 - - logical - 5120 - - logical - 2048 - - logical - 5120 - - logical - 2000- - - disk_config raid raid1 /boot disk1.1,disk2.1 ext3 rw,noatime raid1 swap disk1.5,disk2.5 swap sw raid1 / disk1.6,disk2.6 ext3 rw,errors=remount-ro raid1 /var disk1.7,disk2.7 ext3 rw,noatime raid1 /tmp disk1.8,disk2.8 ext3 rw,noatime raid1 /usr disk1.9,disk2.9 ext3 rw,noatime raid1 /app disk1.10,disk2.10 ext3 rw,noatime This is a working config on our 4.0 install for MD raid. Perhaps it gives you a place to start from? David Dreezer > > We couldn't see an updated manual for FAI 4.0. Is any of this in there? > Alternatively, has there been any work done to implement any of the above, > and if not would you accept a patch if we take our stab at adding support for > this? > > Many thanks! > > Iordan Iordanov > CDF System Administrator, > University of Toronto
