Re: wheezy fai sysinfo reboots without reboot flag

[Brian Kroth]

Thomas Neumann <blacky+...@fluffbunny.de> 2012-08-13 21:33:

On Mon, 13 Aug 2012 12:14:19 -0500
Brian Kroth <bpkr...@gmail.com> wrote:

Hi all, I'm testing fai+wheezy (4.0.3) and have a client setup to pxeboot to a
sysinfo without the reboot flag[...]

Check the list for an earlier message of mine. I've run into the same problem.

If no error occurs, then fai _will_ reboot the system. You can tell fai to halt 
instead, but you can't simply make it stop and do nothing. Reboot or Halt.

Solution:
a) provoke an error somewhere during execution
b) use my attached patch to force a non-reboot

bye
thomas

Here it is for future hunters:
https://lists.uni-koeln.de/pipermail/linux-fai/2012-July/009735.html



Thanks,
Brian

I thought I remembered seeing something similar in the past, but couldn't find it at the time. I should have mentioned earlier that after reading the code I was starting to use option (a) above (there's almost always something that complains during a real install, but I guess not during sysinfo), but I think I'll use your hook instead.

signature.asc
Description: Digital signature