Hi Mike & Thomas,
> > I'm using FAI 4 to install debian on a device that has 6 ethernet
> interfaces on it. Per the installation walkthrough
> > documentation, it looks like FAI 4 is designed to iterate through the
> interfaces, trying each one until dhcp gets an
> > IP.
> This is dracut and not FAI itself that scans all your network devices.
maybe one can add this to the append line:
ip=<interface>:{dhcp|on|any|dhcp6|auto6}[:[<mtu>][:<macaddr>]]
At least it is documented here:
https://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html#_network
So I guess a
ip=eth0:dhcp
should do the job? But I did never test it...
Best regards
Dirk
--
+----------------------------------------------------------------------+
| Dr. Dirk Geschke / Plankensteinweg 61 / 85435 Erding |
| Telefon: 08122-559448 / Mobil: 0176-96906350 / Fax: 08122-9818106 |
| [email protected] / [email protected] / [email protected] |
+----------------------------------------------------------------------+
