>>>>> On Tue, 12 Feb 2019 12:09:33 +0100, Sven Schumacher
>>>>> <[email protected]> said:
> I'd like to partition that raid-volume like this with setup-storage
> disk_config nvme0n1 preserve_always:1,2 disklabel:gpt bootable:1
fstabkey:uuid align-at:4K
> primary /boot/efi 700MB vfat rw
> primary - 128MB - -
> primary - 400GB:resize ntfs ro
> primary swap 16GB swap sw
> primary / 80GB- ext4 rw,noatime,errors=remount-ro
createopts="-L ROOT"
> disk_config raid preserve_always:2 disklabel:gpt fstabkey:uuid
align-at:4K
> primary /boot 50MB ext4 rw
> primary - 1TB- ntfs -
> But setup-storage denies that configuration. the mdadm.conf normally
would be something like that:
Any error messages from setup-storage?
> DEVICES /dev/sda /dev/sdb
> ARRAY md0 devices=/dev/sda,/dev/sdb
> Is this possible? It seems, without having /boot on the harddrive, grub
isn't able to boot linux, because the nvme is in an pcie-slot (called Dell
Ultra-Speed Drive Duo PCIe-SSD-Karte (x8),
> M.2-PCIe-NVMe-SSD (Klasse 40), 512 GB)
For booting from a NVMe device you must use UEFI, not legacy BIOS. So
you need the package grub-efi.
--
regards Thomas
