Hi, with 2.6.33-rc3 the LEDs are not working anymore on my Geode embedded board: If I remember correctly this was working fine with 2.6.32, but certainly with 2.6.31
relevant dmesg output of 2.6.33-rc3: [ 0.709643] cs5535_gpio: base=0x6100 mask=0xb003c66 major=253 [ 2.207947] leds_alix2: system is recognized as "PC Engines ALIX.2 v0.99h" [ 2.228678] leds_alix2: can't allocate I/O for GPIO For reference dmesg of 2.6.31.3: [ 0.611953] cs5535_gpio: base=0x6100 mask=0xb003c66 major=253 [ 2.379114] leds_alix2: system is recognized as "PC Engines ALIX.2" [ 2.399097] Registered led device: alix:1 [ 2.411404] Registered led device: alix:2 [ 2.423720] Registered led device: alix:3 Best regards, Arnd _______________________________________________ Linux-geode mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-geode
