SYSCON driver was designed for using memory areas (registers) that are used in several subsystems. There are systems (CPUs) which use bits in one register for various purposes and thus should be handled by various kernel subsystems. This driver allows you to use the individual SYSCON bits as GPIOs. This is RFC only yet, so I did not add DT bindings for this driver.
Signed-off-by: Alexander Shiyan <[email protected]> --- drivers/gpio/Kconfig | 6 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-syscon.c | 141 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 148 insertions(+) create mode 100644 drivers/gpio/gpio-syscon.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 0f04444..08a3a51 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -252,6 +252,12 @@ config GPIO_STA2X11 Say yes here to support the STA2x11/ConneXt GPIO device. The GPIO module has 128 GPIO pins with alternate functions. +config GPIO_SYSCON + tristate "GPIO based on SYSCON" + depends on MFD_SYSCON && OF + help + Say yes here to support GPIO functionality though SYSCON driver. + config GPIO_TS5500 tristate "TS-5500 DIO blocks and compatibles" help diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 7971e36..01c05d2 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -73,6 +73,7 @@ obj-$(CONFIG_GPIO_STA2X11) += gpio-sta2x11.o obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o +obj-$(CONFIG_GPIO_SYSCON) += gpio-syscon.o obj-$(CONFIG_GPIO_TB10X) += gpio-tb10x.o obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c new file mode 100644 index 0000000..f0c1093 --- /dev/null +++ b/drivers/gpio/gpio-syscon.c @@ -0,0 +1,141 @@ +/* + * SYSCON GPIO driver + * + * Copyright (C) 2013 Alexander Shiyan <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> + +#define GPIO_SYSCON_INPUT (1 << 0) +#define GPIO_SYSCON_OUTPUT (1 << 1) + +struct syscon_gpio_priv { + struct gpio_chip chip; + struct regmap *syscon; + u32 bit_offset; +}; + +static inline struct syscon_gpio_priv *to_syscon_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct syscon_gpio_priv, chip); +} + +static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct syscon_gpio_priv *priv = to_syscon_gpio(chip); + unsigned int val; + int ret; + + ret = regmap_read(priv->syscon, priv->bit_offset / 32, &val); + if (ret < 0) + return ret; + + return !!(val & (priv->bit_offset % 32)); +} + +static void syscon_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct syscon_gpio_priv *priv = to_syscon_gpio(chip); + + regmap_update_bits(priv->syscon, priv->bit_offset / 32, + priv->bit_offset % 32, + val ? priv->bit_offset % 32 : 0); +} + +static int syscon_gpio_dir_in(struct gpio_chip *chip, unsigned offset) +{ + return 0; +} + +static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val) +{ + syscon_gpio_set(chip, offset, val); + + return 0; +} + +static const struct of_device_id syscon_gpio_ids[] = { + { + .compatible = "gpio-syscon-input", + .data = (void *)GPIO_SYSCON_INPUT, + }, + { + .compatible = "gpio-syscon-output", + .data = (void *)GPIO_SYSCON_OUTPUT, + }, + { } +}; +MODULE_DEVICE_TABLE(of, syscon_gpio_ids); + +static int syscon_gpio_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(syscon_gpio_ids, &pdev->dev); + struct device_node *np = pdev->dev.of_node; + struct syscon_gpio_priv *priv; + unsigned int flags; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->syscon = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(priv->syscon)) + return PTR_ERR(priv->syscon); + + if (of_property_read_u32(np, "gpio-syscon,offset", &priv->bit_offset)) + return -EINVAL; + + flags = (unsigned int)of_id->data; + + priv->chip.owner = THIS_MODULE; + priv->chip.label = dev_name(&pdev->dev); + priv->chip.base = -1; + priv->chip.ngpio = 1; + if (flags & GPIO_SYSCON_INPUT) { + priv->chip.get = syscon_gpio_get; + priv->chip.direction_input = syscon_gpio_dir_in; + } + if (flags & GPIO_SYSCON_OUTPUT) { + priv->chip.set = syscon_gpio_set; + priv->chip.direction_output = syscon_gpio_dir_out; + } + + platform_set_drvdata(pdev, priv); + + return gpiochip_add(&priv->chip); +} + +static int syscon_gpio_remove(struct platform_device *pdev) +{ + struct syscon_gpio_priv *priv = platform_get_drvdata(pdev); + + return gpiochip_remove(&priv->chip); +} + +static struct platform_driver syscon_gpio_driver = { + .driver = { + .name = "gpio-syscon", + .owner = THIS_MODULE, + .of_match_table = syscon_gpio_ids, + }, + .probe = syscon_gpio_probe, + .remove = syscon_gpio_remove, +}; +module_platform_driver(syscon_gpio_driver); + +MODULE_AUTHOR("Alexander Shiyan <[email protected]>"); +MODULE_DESCRIPTION("SYSCON GPIO driver"); +MODULE_LICENSE("GPL"); -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
