From: Vincent Donnefort <[email protected]> This patch allows gpio_ich driver to be aware of non blink capable chipsets.
Signed-off-by: Vincent Donnefort <[email protected]> diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c index f5bf3c3..82887c5 100644 --- a/drivers/gpio/gpio-ich.c +++ b/drivers/gpio/gpio-ich.c @@ -62,6 +62,9 @@ struct ichx_desc { /* Max GPIO pins the chipset can have */ uint ngpio; + /* GPO_BLINK is available on this chipset */ + bool have_blink; + /* Whether the chipset has GPIO in GPE0_STS in the PM IO region */ bool uses_gpe0; @@ -151,7 +154,7 @@ static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, int val) { /* Disable blink hardware which is available for GPIOs from 0 to 31. */ - if (nr < 32) + if (nr < 32 && ichx_priv.desc->have_blink) ichx_write_bit(GPO_BLINK, nr, 0, 0); /* Set GPIO output value. */ @@ -266,6 +269,7 @@ static struct ichx_desc ich6_desc = { .uses_gpe0 = true, .ngpio = 50, + .have_blink = true, }; /* Intel 3100 */ @@ -290,19 +294,23 @@ static struct ichx_desc i3100_desc = { /* ICH7 and ICH8-based */ static struct ichx_desc ich7_desc = { .ngpio = 50, + .have_blink = true, }; /* ICH9-based */ static struct ichx_desc ich9_desc = { .ngpio = 61, + .have_blink = true, }; /* ICH10-based - Consumer/corporate versions have different amount of GPIO */ static struct ichx_desc ich10_cons_desc = { .ngpio = 61, + .have_blink = true, }; static struct ichx_desc ich10_corp_desc = { .ngpio = 72, + .have_blink = true, }; /* Intel 5 series, 6 series, 3400 series, and C200 series */ -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
