Convert mdio-mux-gpio to the GPIO descriptor interface and use the new
gpiod_set_array function to set all output signals simultaneously.

Signed-off-by: Rojhalat Ibrahim <[email protected]>
--
This patch depends on the gpiod_set_array function, which is available in
the linux-gpio devel tree.

 drivers/net/phy/mdio-mux-gpio.c |   35 +++++++++++++++--------------------
 1 file changed, 15 insertions(+), 20 deletions(-)

diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index 0966951..3fdea96 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -14,13 +14,13 @@
 #include <linux/mdio-mux.h>
 #include <linux/of_gpio.h>
 
-#define DRV_VERSION "1.0"
+#define DRV_VERSION "1.1"
 #define DRV_DESCRIPTION "GPIO controlled MDIO bus multiplexer driver"
 
 #define MDIO_MUX_GPIO_MAX_BITS 8
 
 struct mdio_mux_gpio_state {
-       int gpio[MDIO_MUX_GPIO_MAX_BITS];
+       struct gpio_desc *gpio[MDIO_MUX_GPIO_MAX_BITS];
        unsigned int num_gpios;
        void *mux_handle;
 };
@@ -28,29 +28,23 @@ struct mdio_mux_gpio_state {
 static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
                                   void *data)
 {
-       int change;
+       int values[MDIO_MUX_GPIO_MAX_BITS];
        unsigned int n;
        struct mdio_mux_gpio_state *s = data;
 
        if (current_child == desired_child)
                return 0;
 
-       change = current_child == -1 ? -1 : current_child ^ desired_child;
-
        for (n = 0; n < s->num_gpios; n++) {
-               if (change & 1)
-                       gpio_set_value_cansleep(s->gpio[n],
-                                               (desired_child & 1) != 0);
-               change >>= 1;
-               desired_child >>= 1;
+               values[n] = (desired_child >> n) & 1;
        }
+       gpiod_set_array_cansleep(s->num_gpios, s->gpio, values);
 
        return 0;
 }
 
 static int mdio_mux_gpio_probe(struct platform_device *pdev)
 {
-       enum of_gpio_flags f;
        struct mdio_mux_gpio_state *s;
        int num_gpios;
        unsigned int n;
@@ -70,20 +64,17 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
        s->num_gpios = num_gpios;
 
        for (n = 0; n < num_gpios; ) {
-               int gpio = of_get_gpio_flags(pdev->dev.of_node, n, &f);
-               if (gpio < 0) {
-                       r = (gpio == -ENODEV) ? -EPROBE_DEFER : gpio;
+               struct gpio_desc *gpio = gpiod_get_index(&pdev->dev,
+                                                        "mdio-mux-gpio", n);
+               if (IS_ERR(gpio)) {
+                       r = PTR_ERR(gpio);
                        goto err;
                }
                s->gpio[n] = gpio;
 
                n++;
 
-               r = gpio_request(gpio, "mdio_mux_gpio");
-               if (r)
-                       goto err;
-
-               r = gpio_direction_output(gpio, 0);
+               r = gpiod_direction_output(gpio, 0);
                if (r)
                        goto err;
        }
@@ -98,15 +89,19 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
 err:
        while (n) {
                n--;
-               gpio_free(s->gpio[n]);
+               gpiod_put(s->gpio[n]);
        }
        return r;
 }
 
 static int mdio_mux_gpio_remove(struct platform_device *pdev)
 {
+       unsigned int n;
        struct mdio_mux_gpio_state *s = dev_get_platdata(&pdev->dev);
        mdio_mux_uninit(s->mux_handle);
+       for (n = 0; n < s->num_gpios; n++) {
+               gpiod_put(s->gpio[n]);
+       }
        return 0;
 }
 
--
2.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to