Hi Sergei,

Thank you for the patch.

On Saturday 10 January 2015 21:21:46 Sergei Shtylyov wrote:
> The R8A7791 manual sometimes calls the signal MLB_CLK and sometimes MLB_CK;
> the latter can only be encountered in the PFC section and  is probably 
> just a typo (this  signal is always called MLB_CLK in the R8A7790  manual).
> Fix occurences of MLB_CK throughout the R8A7791 PFC driver.
> 
> Based on original patch by Andrey Gusakov
> <[email protected]>.
> 
> Signed-off-by: Sergei Shtylyov <[email protected]>

Acked-by: Laurent Pinchart <[email protected]>


> 
> ---
> The patch is against the 'devel' branch of Linus W.'s 'linux-pinctrl.git'
> repo.
> 
>  drivers/pinctrl/sh-pfc/pfc-r8a7791.c |    8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> Index: linux-pinctrl/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
> ===================================================================
> --- linux-pinctrl.orig/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
> +++ linux-pinctrl/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
> @@ -378,7 +378,7 @@ enum {
>       /* IPSR16 */
>       FN_HRX1, FN_SCIFB1_RXD, FN_VI1_R0_B, FN_GLO_SDATA_C, FN_VI1_DATA6_C,
>       FN_HTX1, FN_SCIFB1_TXD, FN_VI1_R1_B, FN_GLO_SS_C, FN_VI1_DATA7_C,
> -     FN_HSCK1, FN_SCIFB1_SCK, FN_MLB_CK, FN_GLO_RFON_C,
> +     FN_HSCK1, FN_SCIFB1_SCK, FN_MLB_CLK, FN_GLO_RFON_C,
>       FN_HCTS1_N, FN_SCIFB1_CTS_N, FN_MLB_SIG, FN_CAN1_TX_B,
>       FN_HRTS1_N, FN_SCIFB1_RTS_N, FN_MLB_DAT, FN_CAN1_RX_B,
> 
> @@ -764,7 +764,7 @@ enum {
>       GLO_SDATA_C_MARK, VI1_DATA6_C_MARK,
>       HTX1_MARK, SCIFB1_TXD_MARK, VI1_R1_B_MARK,
>       GLO_SS_C_MARK, VI1_DATA7_C_MARK,
> -     HSCK1_MARK, SCIFB1_SCK_MARK, MLB_CK_MARK, GLO_RFON_C_MARK,
> +     HSCK1_MARK, SCIFB1_SCK_MARK, MLB_CLK_MARK, GLO_RFON_C_MARK,
>       HCTS1_N_MARK, SCIFB1_CTS_N_MARK, MLB_SIG_MARK, CAN1_TX_B_MARK,
>       HRTS1_N_MARK, SCIFB1_RTS_N_MARK, MLB_DAT_MARK, CAN1_RX_B_MARK,
>       PINMUX_MARK_END,
> @@ -1664,7 +1664,7 @@ static const u16 pinmux_data[] = {
>       PINMUX_IPSR_MODSEL_DATA(IP16_5_3, VI1_DATA7_C, SEL_VI1_2),
>       PINMUX_IPSR_MODSEL_DATA(IP16_7_6, HSCK1, SEL_HSCIF1_0),
>       PINMUX_IPSR_MODSEL_DATA(IP16_7_6, SCIFB1_SCK, SEL_SCIFB1_0),
> -     PINMUX_IPSR_DATA(IP16_7_6, MLB_CK),
> +     PINMUX_IPSR_DATA(IP16_7_6, MLB_CLK),
>       PINMUX_IPSR_MODSEL_DATA(IP16_7_6, GLO_RFON_C, SEL_GPS_2),
>       PINMUX_IPSR_MODSEL_DATA(IP16_9_8, HCTS1_N, SEL_HSCIF1_0),
>       PINMUX_IPSR_DATA(IP16_9_8, SCIFB1_CTS_N),
> @@ -5974,7 +5974,7 @@ static const struct pinmux_cfg_reg pinmu
>               /* IP16_9_8 [2] */
>               FN_HCTS1_N, FN_SCIFB1_CTS_N, FN_MLB_SIG, FN_CAN1_TX_B,
>               /* IP16_7_6 [2] */
> -             FN_HSCK1, FN_SCIFB1_SCK, FN_MLB_CK, FN_GLO_RFON_C,
> +             FN_HSCK1, FN_SCIFB1_SCK, FN_MLB_CLK, FN_GLO_RFON_C,
>               /* IP16_5_3 [3] */
>               FN_HTX1, FN_SCIFB1_TXD, FN_VI1_R1_B,
>               FN_GLO_SS_C, FN_VI1_DATA7_C,

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to