W dniu 2015-01-13 o 09:08, Uwe Kleine-König pisze:
Hello,
On Sat, Jan 10, 2015 at 03:32:44PM +0100, Janusz Uzycki wrote:
The patch updates mxs-auart driver to use new mctrl_gpio helpers for
gpio irqs. The code is much simpler now.
Signed-off-by: Janusz Uzycki <[email protected]>
---
There is no changes since v1 (rebased only).
---
drivers/tty/serial/mxs-auart.c | 133 ++++-------------------------------------
1 file changed, 13 insertions(+), 120 deletions(-)
Very nice!
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index ec553f8..2ddba69 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
[...]
@@ -483,18 +458,9 @@ static void mxs_auart_enable_ms(struct uart_port *port)
s->ms_irq_enabled = true;
- if (s->gpio_irq[UART_GPIO_CTS] >= 0)
- enable_irq(s->gpio_irq[UART_GPIO_CTS]);
- /* TODO: enable AUART_INTR_CTSMIEN otherwise */
-
- if (s->gpio_irq[UART_GPIO_DSR] >= 0)
- enable_irq(s->gpio_irq[UART_GPIO_DSR]);
-
- if (s->gpio_irq[UART_GPIO_RI] >= 0)
- enable_irq(s->gpio_irq[UART_GPIO_RI]);
-
- if (s->gpio_irq[UART_GPIO_DCD] >= 0)
- enable_irq(s->gpio_irq[UART_GPIO_DCD]);
+ mctrl_gpio_enable_ms(s->gpios);
+ /* TODO: enable AUART_INTR_CTSMIEN
+ * if s->gpios->irq[UART_GPIO_CTS] == 0 */
What is the problem here? For the other lines nothing needs to be done?
This comment doesn't match the coding style.
Right, the comment should be rather:
/* TODO: enable AUART_INTR_CTSMIEN
* if (!mctrl_gpio_is_gpio(atmel_port->gpios, UART_GPIO_CTS)) */
In this place I marked that CTSMIEN should be switched on
enable/disable_ms if CTS
is not a gpio. The driver enables CTSMIEN forever what is wrong but I
can't test it
and I don't need it so I've just marked the fact in the comment.
Other than that, this patch looks good.
Uwe
Thanks
Janusz
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
