Hi Thomas, On 20/02/2015 18:04, Thomas Petazzoni wrote: > On Marvell Armada 38x, the USB2 controller registers are at 0x58000, > so the corresponding Device Tree node should have a unit address of > 58000, and not 50000. We were using 50000 due to an incorrect > copy/pastebin of Armada 370/XP code. > > Signed-off-by: Thomas Petazzoni <[email protected]>
Acked-by: Gregory CLEMENT <[email protected]> Thanks, Gregory > --- > arch/arm/boot/dts/armada-388-db.dts | 2 +- > arch/arm/boot/dts/armada-388-gp.dts | 2 +- > arch/arm/boot/dts/armada-38x.dtsi | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/armada-388-db.dts > b/arch/arm/boot/dts/armada-388-db.dts > index 16512ef..af6c74e 100644 > --- a/arch/arm/boot/dts/armada-388-db.dts > +++ b/arch/arm/boot/dts/armada-388-db.dts > @@ -99,7 +99,7 @@ > phy-mode = "rgmii-id"; > }; > > - usb@50000 { > + usb@58000 { > status = "ok"; > }; > > diff --git a/arch/arm/boot/dts/armada-388-gp.dts > b/arch/arm/boot/dts/armada-388-gp.dts > index 590b383..3ff0573 100644 > --- a/arch/arm/boot/dts/armada-388-gp.dts > +++ b/arch/arm/boot/dts/armada-388-gp.dts > @@ -135,7 +135,7 @@ > }; > > /* CON4 */ > - usb@50000 { > + usb@58000 { > vcc-supply = <®_usb2_0_vbus>; > status = "okay"; > }; > diff --git a/arch/arm/boot/dts/armada-38x.dtsi > b/arch/arm/boot/dts/armada-38x.dtsi > index 54ebce7..96d7cf0 100644 > --- a/arch/arm/boot/dts/armada-38x.dtsi > +++ b/arch/arm/boot/dts/armada-38x.dtsi > @@ -435,7 +435,7 @@ > status = "disabled"; > }; > > - usb@50000 { > + usb@58000 { > compatible = "marvell,orion-ehci"; > reg = <0x58000 0x500>; > interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
